70v Amplifiers

Part #: CROWN-135MA

List Price $208.95

…and 160MA are high value mixer-amplifiers for commercial audio. They provide 8-ohm and constant-voltage outputs (70V and 100V). Typical uses are paging, background music, and music-on-hold. The 135MA provides 3 inputs (each with a volume control) and a 35W amplifier output. The 160MA provides 4 inputs…

Part #: TOA-BG-2035-CU

List Price $474.84

…models: BG-2035 (35W), BG-2060 (60W), and the BG-2120 (120W). The BG-2000 Series Mixer/Amplifiers are UL/cUL approved, competitively priced and is backed by TOA's 5 year warranty. * Compact five channel Mixer-Amplifier for paging, background/foreground music distribution and music/messaging-on-hold. * All…

Part #: MA1705

List Price $367.00

Rolls MA1705 70v Mixer Amplifier 70w The MA1705 is a single rack space mixer amplifier designed for installation applications. The unit provides a compact and efficient way to mix up to three sources such as AM/FM tuners, CD players, and video players with up to two microphones. Priority talkover is…

Part #: CROWN-180A

List Price $437.85

…amplifiers for commercial and industrial audio. They provide 4-ohm and constant-voltage outputs (70V and 100V). The amps are part of Crown's Commercial Audio Series, which also includes mixers and mixeramps. These low-cost units provide all necessary features in a simple building-block format. The amplifiers…

Part #: PMM-120A

List Price $647.00

SPECO 120W PA Mixer Power Amplifier with 6 Inputs UL LISTED, 120 Watt RMS; AC 120V, 50/60Hz; 50-15kHz; 6 MIC Inputs, 4 XLR Connectors (1.0mv/250 Ohms); 1 Aux Input (200mV 47K), 1 Telephone (0.1-1V 600 ohm); 4/8/16 ohms & 75/25 V Line Inputs, Music on Hold Features, Separate Bass and Treble Controls.…

Part #: QSC-ISA280

List Price $594.00

…installed sound system. Unique among distributed sound power amplifiers, the "Ti" versions will drive 8 or 4 ohm loads and a distributed system on the same channel simultaneously. This enables a contractor to reduce the number of required amplifier channels by allowing a limited number of distributed speakers…

Part #: CROWN-280A

List Price $625.80

…amplifiers for commercial and industrial audio. They provide 4-ohm and constant-voltage outputs (70V and 100V). The amps are part of Crown's Commercial Audio Series, which also includes mixers and mixeramps. These low-cost units provide all necessary features in a simple building-block format. The amplifiers…

Part #: 280MA

List Price $847.35

Crown's Commercial Audio mixer/amplifiers deliver legendary Crown quality to the commercial audio industry. These high-value mixer/amplifiers provide both 4-ohm and constant-voltage outputs (70V and 100V) for use in a wide range of commercial applications including schools, hospitals, factories, restaurant…

Part #: TOA-DA250F

List Price $1,990.00

…power amplifiers are backed by TOA's five-year warranty. DA-500F-HL * 4x 500W (70V) / * 4x 550W (8 ohms) * 2x 1000W bridged (140V) DA-550F * 4x 550W (4 ohms) / * 4x 370W (8 ohms) * 2x 1100W bridged (8 ohms) * Class D design - 85% efficient! * 30% lower power consumption than conventional amplifiers * Compact…

Part #: TOA-DA250FH

List Price $1,990.00

…power amplifiers are backed by TOA's five-year warranty. DA-500F-HL * 4x 500W (70V) / * 4x 550W (8 ohms) * 2x 1000W bridged (140V) DA-550F * 4x 550W (4 ohms) / * 4x 370W (8 ohms) * 2x 1100W bridged (8 ohms) * Class D design - 85% efficient! * 30% lower power consumption than conventional amplifiers * Compact…

Part #: ISA1350

List Price $1,844.00

…installed sound system. Unique among distributed sound power amplifiers, the "Ti" versions will drive 8 or 4 ohm loads and a distributed system on the same channel simultaneously. This enables a contractor to reduce the number of required amplifier channels by allowing a limited number of distributed speakers…

Part #: QSC-ISA300TI

List Price $793.00

…installed sound system. Unique among distributed sound power amplifiers, the "Ti" versions will drive 8 or 4 ohm loads and a distributed system on the same channel simultaneously. This enables a contractor to reduce the number of required amplifier channels by allowing a limited number of distributed speakers…

Part #: ASH-KLR-2000

List Price $720.00

…of sound reinforcement. All three KLR amplifiers are optimized to deliver high levels of sustained power, extraordinary audio performance, and road-proven reliability into 2, 4, or 8 ohm loads and are housed in a a uniform, rugged 2RU chassis. Each KLR amplifier uses a state-of-the-art Switch Mode Power…

Part #: TOA-DA500FHL

List Price $3,331.20

…power amplifiers are backed by TOA's five-year warranty. DA-500F-HL * 4x 500W (70V) / * 4x 550W (8 ohms) * 2x 1000W bridged (140V) DA-550F * 4x 550W (4 ohms) / * 4x 370W (8 ohms) * 2x 1100W bridged (8 ohms) * Class D design - 85% efficient! * 30% lower power consumption than conventional amplifiers * Compact…

Part #: TRA-2150

List Price $1,160.00

…Two-channel 150W/ch @ 4 ohms 70V and 100V Amplifier Ashly's TRA-Series expands on the SRA's concept of "the right amp for the job." These 2RU amplifiers utilize our state of the art technology to create advanced, efficient amplifiers perfect for low impedance, 25V, 70V or 100V installations with modest…

Part #: ASH-NE4250-70

List Price $1,610.00

Ashly NE Series 4250 Four-channel, 250W/ch at 4 Ohms Amplifier- 25V, 70V, 100V Connecting and controlling an amplifier for networked systems has now been simplified with Ashly's NE Series amplifiers. Network Enabled (NE) amplifiers offer ease of use, setup and control using standard 10/100 Ethernet…

Part #: ASH-NE4250-70DSP

List Price $2,330.00

Ashly NE Series 4250 Four-channel, 250W/ch at 4 Ohms Amplifier- 25V, 70V, 100V Connecting and controlling an amplifier for networked systems has now been simplified with Ashly's NE Series amplifiers. Network Enabled (NE) amplifiers offer ease of use, setup and control using standard 10/100 Ethernet…

Part #: QSC-CX204V

QSC CX204V 4 Channels Power Amplifier (200 watts/ch at 70V) CX 4-Channel Series The new 4-channel CX amplifiers give you four channels in only two rack spaces-without compromising on power. Choose from three models - a direct 70 volt model and two low impedance versions, each equipped with our exclusive…

Part #: CVA25-1

List Price $299.00

…-25-1 Mono Sub Compact Amplifier - 25W x 1 at 25V/70V The sub compact CVA-25-1 and CVA-50-1 are built to meet the rigorous demands of high quality commercial, industrial and Pro Audio sound installations. Low cost, lightweight and convection cooling make this Class D amplifier flexible enough for a broad…

Part #: CX-302V

…limiting eliminates AC inrush current, cutting the need for power sequencers. CX amplifiers also include an HD15 Data Port connector to interface with QSControl, QSC's computer-controlled audio system, that allowes remote amplifier monitoring and control via a standard Ethernet network. Features: * 8 models…

Part #: ATL-PA1001G

List Price $384.95

This amplifier features an ultra compact design requiring only 1RU in height and 1/2 rack wide in space. The 100W into a 70V or 100V distributed system gives the power to meet most amplifier demands. The PA1001G power supply supports 120-240VAC power for global use and operation. The patent pending through…

Part #: TOA-BG-2060-CU

List Price $653.76

…models: BG-2035 (35W), BG-2060 (60W), and the BG-2120 (120W). The BG-2000 Series Mixer/Amplifiers are UL/cUL approved, competitively priced and is backed by TOA's 5 year warranty. * Compact five channel Mixer-Amplifier for paging, background/foreground music distribution and music/messaging-on-hold. * All…

Part #: QSC-ISA500TI

List Price $911.00

…installed sound system. Unique among distributed sound power amplifiers, the "Ti" versions will drive 8 or 4 ohm loads and a distributed system on the same channel simultaneously. This enables a contractor to reduce the number of required amplifier channels by allowing a limited number of distributed speakers…

Part #: QSC-ISA800TI

List Price $1,190.00

…installed sound system. Unique among distributed sound power amplifiers, the "Ti" versions will drive 8 or 4 ohm loads and a distributed system on the same channel simultaneously. This enables a contractor to reduce the number of required amplifier channels by allowing a limited number of distributed speakers…