Aes To Bnc

Part #: SW-367

List Price $34.74

…Switchcraft are used to convert 110 Ohm AES/EBU digital audio signals to 75 Ohm signals and 75 Ohm signals to 110 Ohm. This allows for long distance transmission of AES/EBU digital audio over standard 75 Ohm coaxial lines. The adapters can also be used to connect AES/EBU digital audio signals to high-definition…

Part #: SW-367R

List Price $46.00

…racks and wall plates. AudioStix are made in the USA. #366R: AES-EBU Adapter (110-75 Ohm), Female XLR to BNC #367R: AES-EBU Adapter (75-110 Ohm), BNC to Male XLR Features:* XLR Female to BNC (366R)* BNC to XLR Male (367R)* Adapts 75 Ohm (BNC) to 110 Ohm (XLR)* Transformer Isolation* Use individually or…

Part #: SW-366R

List Price $46.00

…racks and wall plates. AudioStix are made in the USA. #366R: AES-EBU Adapter (110-75 Ohm), Female XLR to BNC #367R: AES-EBU Adapter (75-110 Ohm), BNC to Male XLR Features:* XLR Female to BNC (366R)* BNC to XLR Male (367R)* Adapts 75 Ohm (BNC) to 110 Ohm (XLR)* Transformer Isolation* Use individually or…

Part #: XJ3F-TRB-BCJ

List Price $65.80

…transmission of 2 Channel Digital Audio * Allows longer cable runs than 110 ohm twisted pair * AES/EBU Signal distribution using Canare 75 ohm Video Patchbays APPLICATIONS: * Post Production Suites * Recording Studios * AES/EBU Digital Audio Routing GENERAL SPECIFICATIONS * Bandwidth: 0.1 - 6MHz * Maximum Voltage…

Part #: ETS-PA818-F

List Price $766.00

…-F (8) F-XLR to 75Ohm F-BNC (10db PAD) ETS, long a leader in baluns for computer networks, applies our expertise in Balanced Line™ technology to the XLR to BNC Digital Audio Baluns (DAB) and DAB Panels. The PA810 Series of baluns and balun panels from ETS are designed to connect AES/EBU signals from…

Part #: SES-AES-EBU-1

List Price $18.95

Sescom SES-AES-EBU-1 110 Ohm Female XLR In to 75 Ohm BNC Female Out AES/EBU Impedance Transformer * 110 Ohm Female XLR to 75 Ohm AES-EBU in-line transformers * BNC to 3-Pin XLR Receptacle (male & female versions) * Provides an excellent impedance transformer at a reasonable cost for meeting the needs…

Part #: NA-BF

List Price $41.19

In addition to the original NA-BF/NA-BM adapters, two new versions in this series are now available. The BNC to 3-Pin XLR Receptacle (male & female) and the BNC to XLR cable end (male & female). Developed to provide and excellent impedance transformer at a reasonable cost for meeting the needs between…

Part #: ETS-PA810

List Price $58.60

* Converts AES/EBU digital audio between balanced 110 Ohm XLR and unbalanced 75 Ohm BNC * Inline baluns * 10 dB Pad available to attenuate signals to 1 VP-Pfor compatibility with VDA and router equipment * Metal cases, chassis * Made in USA. 100% QA. ETS, long a leader in baluns for computer networks…

Part #: ETS-PA811

List Price $58.60

* Converts AES/EBU digital audio between balanced 110 Ohm XLR and unbalanced 75 Ohm BNC * Inline baluns * 10 dB Pad available to attenuate signals to 1 VP-Pfor compatibility with VDA and router equipment * Metal cases, chassis * Made in USA. 100% QA. ETS, long a leader in baluns for computer networks…

Part #: ETS-PA812

List Price $73.30

* Converts AES/EBU digital audio between balanced 110 Ohm XLR and unbalanced 75 Ohm BNC * Inline baluns * 10 dB Pad available to attenuate signals to 1 VP-Pfor compatibility with VDA and router equipment * Metal cases, chassis * Made in USA. 100% QA. ETS, long a leader in baluns for computer networks…

Part #: AESEBU1

List Price $18.95

* 110 Ohm XLR to 75 Ohm AES-EBU in-line transformers * BNC to 3-Pin XLR Receptacle (male & female versions) * Provides an excellent impedance transformer at a reasonable cost for meeting the needs between analog to digital conversion * Also allows for longer cable runs via unbalanced coaxial lines rather…

Part #: AESEBU2

List Price $18.95

* 110 Ohm XLR to 75 Ohm AES-EBU in-line transformers * BNC to 3-Pin XLR Receptacle (male & female versions) * Provides an excellent impedance transformer at a reasonable cost for meeting the needs between analog to digital conversion * Also allows for longer cable runs via unbalanced coaxial lines rather…

Part #: WH-AESQBOX

List Price $739.56

…functions as an AES-3 or S/PDIF receiver. It is capable of receiving sample frequencies from 32kHz to 192kHz, and provides audio monitoring via a built-in speaker or line/headphone output jack. Connectors include S/PDIF in (BNC female), AES-3 in (XLR female), S/PDIF out (BNC female), AES-3 out (XLR male…

Part #: WARD-IMP-1F-10

List Price $75.00

…BNC connector. The conversion transformer changes a 110 Ohm balanced AES signal to a 75 Ohm unbalanced signal. Ideal for interfacing to a equipment with balanced AES connectors. An internal resistive pad introduces a -10dB in the signal in applications where low cost video DA's may be used for AES…

Part #: WARD-AMS8-1AA75

List Price $3,875.00

…to handle 75 Ohm, unbalanced AES and analog audio signals. Eight PPM/VU LED bar-graphs display signal activity, while a sophisticated multi-speaker system allows operators to listen, with great clarity, to the signal being monitored. The AMS8-1AA/75 has four unbalanced digital audio inputs on BNC connectors…

Part #: WARD-IMP-1M

List Price $75.00

…with a BNC and XLR-3(M) connector. The conversion transformer changes a 75 Ohm unbalanced AES signal to a 110 Ohm balanced signal. Ideal for interfacing to a equipment with balanced AES connectors.Features:* In-line 110 to 75 Ohm converter* ideal for use with equipment with XLR-3 type AES connectorsSpecifications…

Part #: WARD-AMS8-2AEM

List Price $6,945.00

…terminals or unbalanced signals on BNC connectors. The demux module provides a re-clocked copy of the input digital video signal as well as a copy of the AES group that is selected for monitoring. The unit provides an analog stereo output that is a copy of the signal being fed to the integral speakers. This…

Part #: WH-AESQBOX-44-1

List Price $739.56

…functions as an AES-3 or S/PDIF receiver. It is capable of receiving sample frequencies from 32kHz to 192kHz, and provides audio monitoring via a built-in speaker or line/headphone output jack. Connectors include S/PDIF in (BNC female), AES-3 in (XLR female), S/PDIF out (BNC female), AES-3 out (XLR male…

Part #: VI-CTD8

List Price $1,699.00

…. Synthetic, easy to understand, voice. LED indicators show channel is being voiced. Unit is pre-programmed with generic sequencing phrases ("Channel One", "Channel Two", etc.). * AES/EBU Stereo digital outputs: All digital serial outputs are greater than 1.0VP-P into 75 Ohms. BNC connectors. All tones…

Part #: WARD-AMS8-2AA

List Price $4,375.00

…BNC connectors) and four analog stereo inputs. An internal switcher allows the operator to toggle between the balanced and unbalanced AES inputs. A reference input for DARS is provided. This may be 110 Ohms, balanced, via a 3-pin pluggable screw terminal connector or 75 Ohms, unbalanced, via a BNC…

Part #: WARD-AMS8-2AM

List Price $4,875.00

…on 3-pin screw terminal pluggable connectors and 75 Ohm unbalanced inputs are on BNC connectors. An internal switcher allows the operator to toggle between the two banks of four balanced and unbalanced inputs. Four AES output signals that are copies of the input signals are provided on the rear panel…

Part #: SW-366

List Price $34.71

…Switchcraft are used to convert 110 Ohm AES/EBU digital audio signals to 75 Ohm signals and 75 Ohm signals to 110 Ohm. This allows for long distance transmission of AES/EBU digital audio over standard 75 Ohm coaxial lines. The adapters can also be used to connect AES/EBU digital audio signals to high-definition…

Part #: WARD-AMS8-2A

List Price $3,995.00

…clarity, to the signal being monitored. The AMS8-2A has four digital audio inputs (110 Ohm balanced inputs are on 3-pin pluggable screw terminal connectors and 75 Ohm unbalanced inputs are on BNC connectors). An internal switcher allows the operator to toggle between the balanced and unbalanced AES inputs…

Part #: WARD-IMP-12B

List Price $695.00

…110 to 75 Ohm converters and six 75 to 110 Ohm converters in a one rack unit panel is ideal for applications were multiple impedance converters in both directions are required. The six XLR-3(F) and six XLR-3(M) connectors on one side are for the balanced 110 Ohm inputs and outputs while the BNC connectors…