Balanced Audio Splitter

Part #: KR-VM3AN

List Price $175.00

The VM-3AN is a high-performance distribution amplifier for balanced stereo audio signals. The unit takes one stereo input and distributes the signal to three identical outputs. Features * S/N Ratio - 90dB * L & R Level (Gain) Controls * Compact Kramer TOOLS - 3 units can be rack mounted side-by-side…

Part #: ETS-PA832

List Price $95.00

…are the Balanced Line™ Digital Audio Splitters and Digital Audio Splitter Panels. These products are expressly designed for the digital audio market. Used only for balanced 110 Ohm signals, these units accommodate signal levels to 10V. Since proper impedance is maintained, the splitters do not have…

Part #: ETS-PA830

List Price $95.00

…are the Balanced Line™ Digital Audio Splitters and Digital Audio Splitter Panels. These products are expressly designed for the digital audio market. Used only for balanced 110 Ohm signals, these units accommodate signal levels to 10V. Since proper impedance is maintained, the splitters do not have…

Part #: ES 217

List Price $195.00

…/reconnect. The ES-217 is an Audio DA with four independently adjustable (via the top-mounted Gain controls) outputs, while the ES-218* has a single Gain control that adjusts all four outputs simultaneously. The transformerless design accepts balanced or unbalanced audio and provides four exact copies…

Part #: OMX-7004

List Price $660.00

…OMX-7004 is a full broadcast spec, state of the art 1 x 10 Balanced Audio DA designed for studio and other demanding applications. The OMX-7004 has two inputs and can be programmed by the user to function as 1x10 Mono DA or as a 2x1x5 Stereo DA. Bi-Fet amplifying circuitry and a high power discrete buffering…

Part #: ARX-MSX32TS

List Price $3,295.00

…metering * Electronically Balanced Inputs and Outputs (standard) * Transformer balanced Outputs option * Intuitive, 'user friendly' layout * Flawless audio performance Superb Audio Quality Active microphone and line signal splitting has a number of benefits over using passive splitters: primarily these are…

Part #: GXY-JIBS

List Price $39.99

…people who need the same monitor mix. The JIB/S works great with powered speakers, amplifiers, or headphones. The JIB/S has balanced TRS inputs and outputs, for use with balanced, unbalanced, and stereo left/right signals.

Part #: MS-20C

List Price $60.00

Rolls MS20c Mic Splitter / Combiner / Isolator The MS20c Splitter / Combiner / Isolator will split a single balanced XLR signal into two isolated signals, combine two balanced XLR signals together into a single, or simply isolate a balanced line for buzz or hum elimination. Please note that when combining…

Part #: BEH-DI20

List Price $43.99

…engineers. The DI20 converts 2 separate unbalanced 1/4" jack inputs into 2 balanced XLR outputs. There is a 2-channel/link mode for flexible usage as mono, 2-channel or splitter box. In link mode, channel 1 can be split up into 2 balanced XLR connectors plus 1 unbalanced 1/4" jack connector. Switchable input…

Part #: ARX-MSX48

List Price $2,095.00

…/Line Splitter has been developed to deliver the performance required by the increasing complexity of today's standards of audio production. The MSX 48 is a totally passive device requiring no power, and consists of Sixteen channels of transformer isolated ultra low noise Microphone/Line Splitter. Each…

Part #: ARX-MSX32E

List Price $3,095.00

…metering * Electronically Balanced Inputs and Outputs (standard) * Transformer balanced Outputs option * Intuitive, 'user friendly' layout * Flawless audio performance Superb Audio Quality Active microphone and line signal splitting has a number of benefits over using passive splitters: primarily these are…

Part #: ART-SPLITCOMPRO

List Price $45.00

ART SPLITCOMPRO 2-Way Mic Splitter/Combiner Use the SPLITCom Pro to Split or Combine balanced low impedance microphone signals. As a Splitter: The SPLITCom Pro provides one direct-coupled output and one isolated output from a single microphone. Applications include sending the direct output to the main…

Part #: RAD-8OX

List Price $950.00

…8ox splitters. Inputs can be routed to the front mounted balanced XLR-F connectors, or the rear facing D-sub or Euroblock (Phoenix) connectors or any combination thereof. Output connections can be routed through either the D-sub or Euroblock connectors or a combination of these. The 8ox splitter is designed…

Part #: OMX-7023

List Price $345.00

The OMX-7023 is an ultra-high bandwidth, Video Audio-Stereo Distribution Amplifier designed for analog and digital studio applications. The OMX-7023 splits a single input source - composite, single component or Serial Digital video - into five identical outputs. Video output signals can be AC or DC coupled…

Part #: CB-9241

List Price $325.00

…9241 Analog 1x8 Mono or 1x4 Stereo Audio Distribution Amplifier with Summing Control The 9241 is an analog audio distribution amplifier with up to eight low-impedance outputs designed for broadcast use. It can be used as either a mono or two-channel (stereo) audio DA. The 9241 can provide eight copies…

Part #: ARX-MAXISPLIT

List Price $695.00

…signal needs to be buffered and balanced as well. The Solution To fulfill this seemingly simple but important signal splitting task, ARX have designed the MaxiSPLIT: - two independent channels of 1 into 4 Splitters, switchable to a single channel 1 into 8 Splitter by using the rear panel channel link…

Part #: VM-1411

List Price $720.00

The Kramer VM-1411 is an exceptionally high performance distribution amplifier for composite video and balanced audio signals. Using front panel controls, the video and audio sections can be independently configured as a single channel 1x10, or as a two channel 1x5. In either mode its purpose is to…

Part #: ETS-PA835

List Price $360.00

…are the Balanced Line™ Digital Audio Splitters and Digital Audio Splitter Panels. These products are expressly designed for the digital audio market. Used only for balanced 110 Ohm signals, these units accommodate signal levels to 10V. Since proper impedance is maintained, the splitters do not have…

Part #: RAD-JS2

List Price $250.00

…Compact design - may be J-Rak mounted * Ultra rugged 14-gauge steel construction The Radial JS2 and JS3 are Jensen Transformer equipped mic splitters that allow a balanced source to drive multiple destinations via standard XLR connectors. These passive devices feature a premium nickel laminated core transformer…

Part #: IEC-740

List Price $385.00

Link IEC-740 Audio DA, 1X8 Mono, 1X4 Stereo The Link IEC-740 audio distribution amplifier reflects the latest in the state of the art in engineering techniques. The IEC-740 is an extremely versatile audio amplifier, offering outstanding performance. The input is high impedance bridging. All inputs and…

Part #: ARX-MSX8TALL

List Price $1,195.00

…of audio quality are higher than ever. With these requirements in mind, ARX has developed the MSX 8 Active Microphone/Line Splitter to deliver the performance required by today's standards of audio production. Active microphone and line splitting has a number of benefits over passive splitters: primarily…

Part #: VM-1120

List Price $990.00

…high performance distribution amplifier for balanced mono audio signals on XLR connectors. It can be configured as a 1:10 distribution amplifier for stereo balanced audio signals. FEATURES: * Grouped Audio Level Controls. * Dual Mode - Configure as 1:20 (mono) or 1:10 (stereo) DA. * SN Ratio - 89.3dB…

Part #: VM-1110XL

List Price $660.00

…Distribution Amp The VM-1110xl is a high performance distribution amplifier for balanced mono audio signals on XLR connectors. It can be configuredas a 1x5 distribution amplifier for stereo balanced audio signals. Features: * Level (Gain) Controls. * Dual Mode - Configure as 1:10 (mono) or 1:5 (stereo) DA. * S…

Part #: VM-1610

List Price $765.00

The Kramer VM-1610 is a high performance distribution amplifier for balanced audio stereo signals with two inputs, using detachable screw terminal connectors. Using a simple front panel switch, it can be configured as either a 1x10 DA, or as a 2 x 1x5 DA. In either mode, its purpose is to accept an input…