Jib

Part #: KESS-8U

The Kessler KC-8 Crane comes standard as an 8 Foot Crane but can be converted into a 12 foot crane at any time by ordering an optional upgrade kit. Tripod shown not included. * Camera capacity: up to 25lbs. in under slung position * Unit weight: 20 lbs. * Folded length: 48 inches. * Extended length:…

Part #: STEAD-5030

List Price $459.00

Our longest single bar crane. With the ability to boom a camera weighing up to 6.5lbs, the Cobra Crane 1 Plus can reach up to 12 feet above the ground (on a 5 foot Tripod, not included) and can go as low as ground level, offering incredible performance at a very competitive price.

Part #: KESS-KCLITE8

…shooting on a tight budget, using a lighter digital video or DSLR camera under 10 pounds, we feel the KC-Lite is the highest quality camera crane / jib in the sub $400 price range. Based off the design of our standard dual-rail KC series of camera cranes, the KC-Lite is a 100% tool-less, single rail…

Part #: CRANE-1

List Price $599.00

The Camcrane 200 is a tripod mounted (tripod not included), boom-arm, camera crane system designed to allow you to smoothly boom your camera up and down and move your camera in an infinite number of 360 degree areas. When balanced and used correctly, the Camcrane 200 moves with tremendous precision…

Part #: KESS-8UHD

The Kessler KC-8 Crane comes standard as an 8 Foot Crane but can be converted into a 12 foot crane at any time by ordering an optional upgrade kit. Tripod shown not included. * Camera capacity: up to 25lbs. in under slung position * Unit weight: 20 lbs. * Folded length: 48 inches. * Extended length:…

Part #: JONYJIB-MM20

List Price $2,200.00

The MotorHead 20 & 30 Head pans and tilts your film or video camera smoothly and accurately by proportional joystick control. Use on your JonyJib, a remote mount, or on a tripod. This unit uses standard 12 volt DC power via a 4pin XLR connection, so it may be powered from your 12 volt battery…

Part #: JONYJIB2-15

List Price $2,595.00

…jib giving 15 feet of camera height and 9-10 feet of reach. It includes 4 mast sections, camera platform, leveling cable, pivot bracket, 100mm mounting hub and rear control and weight mounting center. It also comes with an articulating mounting bracket with 1/4" screw for your LCD monitor. This jib…

Part #: JONYJIB2-18

List Price $3,095.00

…jib giving 18 feet of camera height and 12-13 feet of reach. It includes 5 mast sections, camera platform, leveling cable, pivot bracket, 100mm mounting hub and rear control and weight mounting center. It also comes with an articulating mounting bracket with 1/4" screw for your LCD monitor. This jib…

Part #: JONYJIB2-12

List Price $2,095.00

…jib giving 12 feet of camera height and 6-7 feet of reach. It includes 3 mast sections, camera platform, leveling cable, pivot bracket, 100mm mounting hub and rear control and weight mounting center. It also comes with an articulating mounting bracket with 1/4" screw for your LCD monitor. This jib…

Part #: JONYJIB-MM10

List Price $1,700.00

…cameras up to 10 lbs. Motorized heads provide full 360 degree, smooth pans and tilts for your camera. The joystick fitted controller mounts to the jib rear control center and has speed control and null zone control knobs. This MotorHead 10 unit carries cameras up to 10 lbs. Mounting is via a 3/8" bolt…

Part #: STEAD-5035

List Price $419.00

Our most versitile single bar crane. Designed with versitillity in mind the Cobra Crane 1 with Ext. Kit 1 can be configured either as a 5 foot crane or an 8 foot crane allowing for the flexibility of using just the right length for the job. With the ability to boom a camera weighing up to 6.5lbs,…

Part #: VZ-MC100

List Price $2,999.95

…Lightweight head mounts to nearly any jib or tripod and can be integrated into permanent AV systems in studios, reality TV shows, churches, or auditoriums. A Powerful Tool - Total remote camera operation becomes possible with the MC100 system. Whether it is mounted on a jib or crane, placed on a tripod as…

Part #: KESS-128U

The Kessler 12/8 Crane comes standard as a 12 Foot Crane but can be converted into an 8 foot crane whenever the action calls for it. Tripod shown not included. * Camera capacity: up to 20lbs. in under slung position * Unit weight: 30 lbs. * Folded length: 48 inches. * Extended length: 12 ft. *…

Part #: JONYJIB2-9

List Price $1,595.00

…jib giving 9 feet of camera height and 3-6 feet of reach. It includes 2 mast sections, camera platform, leveling cable, pivot bracket, 100mm mounting hub and rear control and weight mounting center. It also comes with an articulating mounting bracket with 1/4" screw for your LCD monitor. This jib has…

Part #: KESS-KPOD

Kessler K-Pod System The Kessler K-Pod System is a revolutionary tripod system designed specifically for use with camera cranes/jibs. The K-Pod has extremely rigid double strut legs with the patent pending incremental Posi-Lock System, that friction locks the legs, as well as interlocks into incremental…

Part #: VZ-QUICKJIBK-50

List Price $4,799.95

VariZoom VZ-QUICKJIBKIT-50 QuickJib Kit with MC50 Pan/Tilt Head QuickJib Kit includes Jib, DCR100 Dolly, TCR100 tripod, and MC50 Pan/Tilt head

Part #: V-LCD50-HDMI

List Price $599.00

…using 4 AA batteries or the included power supply. The bottom 1/4"-20 mount allows this lightweight unit to be mounted to most DSLRs, cranes, and jibs. * Screen Size (Display Area): 5-inch Diagonal * Resolution (Pixels): 800 x 480 * Viewing Angle: L/R: 85° + U/D: 85° * Brightness (in cd/m?): 300…

Part #: JONYJIB-WK-L

List Price $250.00

The Jony JonyJib Wiring Kit 30' is a wiring kit for the JonyJib camera crane system. This kit offers 30' of Pan & Tilt, Zoom & Focus, Power, and video cable bundled in a black braided mesh. It offers security and convienience in one cable package.

Part #: KESS-PJ-CASE

Kessler Pocket Jib™ Custom Case This is a custom case for the Pocket Jib. It is very handy for transportation purposes.

Part #: DJ-SLYDERDOLLY40

List Price $399.95

…-on tracking shot of your subject. Or you can be more dramatic when the Slyder Dolly is used low to the ground or at an angle - almost like a small jib. You can also point the track at the subject and use the movement to bring items in and out of focus. Custom extruded aircraft-grade 6000 series aluminum…

Part #: JONYJIB-PRO24

List Price $5,295.00

The Jony JibPro 24 is a modular jib arm built to be lightweight and portable without sacrificing functionality. The design revolves around a series of 4' modules that provide 3' of extention each (since there is a 1' overlap when the modules are connected). The JibPro can be extended all the way up to…

Part #: GL-VH

List Price $2,299.00

…converter that can be used all over the world. The Glidecam Vista Head works great with the Glidecam Camcrane 200, as well as other brand crane and jib arms.

Part #: KESS-5UHD

The Kessler KC-5 Crane comes standard as a 5 Foot Crane but can be converted into an 8 foot or 12 foot crane at any time by ordering an optional upgrade kit. Tripod shown not included. * Camera capacity: up to 50lbs. in under slung position * Unit weight: 15 lbs. * Folded length: 48 inches. *…

Part #: KESS-PJ

…Pocket Jib (Jib w/ 100mm Swivel Mount) The Kessler Pocket Jib™ is the ultimate compact, portable jib. Not only is this jib fully collapsable for easy transport, but you can also mount the Kessler Pocket Dolly™ to it, turning it into a virtual "all-in-one" production tool, offering both a jib and mini…