…purely digital representation of an audio signal's loudness. The unit features fourteen LED's (nine Green, one Yellow and four Red) that display levels of -25, -20, -15, -10, -7, -5, -3, -2, -1, 0, +1, +2, +3 and +4 db. Units are shipped in Peak mode unless otherwise specified (Fast or Slow Averaging may…
…an audio signal's loudness. The unit features ten LED's (six Green, one Yellow and three Red) that display levels of -20, -10, -7, -5, -3, -1, 0, +1, +2, and +3 db. One LED is lit at a time and simulates the "flying wand" effect of an analog meter. Units are shipped in Peak mode unless otherwise specified…
…load imp. 8 ohms or more * Rated output power 20mW + 20mW (32 ohms, 1kHz) * Level meters: 26-dot LEDmeter x 2 * When digital input is selected * Peak metering, 0dB: 0dBFS * When analog input is selected * VU metering, 0dB: +4DBu/-10dBV * PHYSICAL * External dimensions: 430(W) x 44(H) x 282(D) mm * Weight…
Low Cost 2 Channel Audio LEDdBMeter Monitor Your Audio Levels With LED Clarity! * Designed to set in an amp rack to view your decibel level * Creates a great visual effect in your amp rack * Display progresses from green through amber to red * Sensitivity adjustment on both left and right channels…
…purely digital representation of an audio signal's loudness. The unit features fourteen LED's (nine Green, one Yellow and four Red) that display levels of -25, -20, -15, -10, -7, -5, -3, -2, -1, 0, +1, +2, +3 and +4 db. Units are shipped in Peak mode. The panel is designed for console mounting. Four pigtail…
FEATURES: * Analog 4 Channel In-Rack Professional Level Metering System * Only 1U of Rack Space * 4 Ultra-High Resolution 106 Segment Tri-Color LED Bargraphs * Simultaneous VU (bar) and PPM (dot) Bargraph Display Ballistics * Simultaneous Visual Monitoring of all Channels * 4 Mini-Phoenix Input Connectors…
…necessary features in it's line of analog metering systems to satisfy the most discerning engineers. The Coleman VU meter line has been updated to have an adjustable peak indication as well as the factory alignment. The new operating levels are +10db and +4 db to make the VU respond in a useable scale…
…unrivaled flexibility. The AR-DM1 and AR-DM2 each provide tri-color LEDs for monitoring of signal presence and system status while the AR-DM1-B and AR-DM2-B provide 10 and 20-segment tri-color bargraphs respectively. Both VU and peak metering are supported. The flagship AR-DM2-L provides dual 4" high resolution…
…Alesis 3630 Specs: * Threshold (dB): -40 to +20 dB * Ratio: 1:1 to inf:1 * Attack Times: 0.1 to 200 ms/prog dependent * Release Times: 50 ms to 3 sec * Gain Control: Output * Bypass Switch: Yes * # of Channels/Stereo Link: 2/Yes * Meter Type (VU, LED, etc.): 12-seg LED * Main I/O Types (XLR, 1/4", etc…
…strength indication. Ten 3 dB steps (total 30 dB range) . Level 5 = 1 Volt P-P nominal. * VU meters: Direct-from-digital stream, no calibration ever required, Peak reading. 16 LEDS: Each representing 3dB. Top led = 0 to -1.5 dBFS, second LED= -1.5 to -4.5 dBFS (-3dB nominal), last LED = -43.5 to -46.5 (-45dB…
…Noise Reduction system. It also includes +12 dB input gain range; switchable +6 or +15 dB boost/cut range; XLR, Barrier strip, and 1/4in inputs; nonconductive nylon sliders; and an intuitive user interface with comprehensive output and gain reduction metering. As always, the inevitable result of our meticulous…
…P-SOLORibbon has an electronically balanced, high-impedance mic input, discrete FET instrument input, 80Hz High Pass Filter, a 4-segment LED bar graph level meter with signal present and overload indicators, plus a continuously variable gain control. The back panel offers both XLR and TRS balanced outputs…
…panel. All splits have the option of transformer balancing if so specified. Each channel has a -20 dB pad switch plus silently switchable 48V Phantom power with indicator LED. A PFL switch and 6 LEDmetering enables each channel to be easily checked with headphones for signal monitoring, and also for line…
…dBu balanced (nominal), +25 dBu maximum; -10 dBV unbalanced* Input Gain Adjustments (2): -5 dB to +15 dB (rel. +4 dBu balanced); -3 dB to +17 dB (rel. -10 dBV unbalanced)* Input Metering (2): Dual-LED VU Meter for Input A and Input B* Mono mode: Rear-panel switch-selectable (input A feeds all 8 outputs…
…dBu balanced (nominal), +25 dBu maximum; -10 dBV unbalanced* Input Gain Adjustments (2): -5 dB to +15 dB (rel. +4 dBu balanced); -3 dB to +17 dB (rel. -10 dBV unbalanced)* Input Metering (2): Dual-LED VU Meter for Input A and Input B* Mono mode: Rear-panel switch-selectable (input A feeds all 16 outputs…
…continuous adjustment between 20 dB and 60 dB (for the line-level output) to set the correct gain for normal microphone levels. A CLIP LED flashes if a signal peak is within 1 dB of clipping. A seven LEDmetering string displays the instantaneous gain reduction in 3 dB increments. The HR-MCP2 offers exceptional…
…Switchable boost/cut range between 6 dB and 12 dB * EQ IN/OUT switch * I/O Level meter switch * Dedicated mono subwoofer outputs with adjustable crossover frequencies * +15dB to -8 input gain range for easy level matching * Stereo link function * 8-segment LEDmeter with clip warning for input * Illuminated…
…between 20 dB and 60 dB. An RDL Dual-LED VU meter is provided adjacent to each gain control. The meters are calibrated to indicate +4 dBu at the associated balanced output. A separate CLIP LED flashes if a signal peak is within 3 dB of clipping. The trigger threshold of the CLIP LED is 17 dB above a normal…
…panel. The peak LEDs double as the programming indicators during setup. The MODE MENU has four selection categories: METERING RSP (peak or average response) for the main audio meter; METERING 0 REF (sets meter scaling to -14, -16, 18 or -20 dBFS for a 0 dB reading); DISPLAY BRT (sets LED display brightness…
…SM10 features front panel headphone and monitor outputs with dedicated level controls. The mix may be audited with the SM10's 6-segment LEDmeter and a flexible meter/headphone source control. The generously featured SM10 Line Mixer is right at home on stage, in studios, boardrooms, health clubs, restaurants…
…-panel DIP switch sets the music to fade under the message (-20 dB nominal) or completely off (used for messages containing music). The module output level is a nominal +4 dBu balanced. The output level is indicated on an RDL dual-LED VU meter which is used to set the proper music and recording levels. The…
…meter POD22 displays both VU and Peak Program information simultaneously. A pair of sticky peak LEDs can be set to display peaks that exceed a preset limit. Also included is a seven segment phase correlation meter and six status LEDs to display sample rate, lock to signal and error. More than a meter,…
…metering circuit features two inputs, an LEDmeter and a monitor speaker. The balanced input is front-panel switch selectable for MIC or LINE input (pro). The unbalanced input operates at -10 dBV (consumer). Either input may be used to feed the metering circuit. For balanced +4 dBu inputs, meter 0 dB…
…(stereo), +16 dBV max. * Frequency Response: 80 Hz to 40 kHz (ñ1 dB, mic input, -6 dB at 20 Hz with integral high-pass filter), 10 Hz to 20 kHz (ñ0.01 dB, line input) * THD+N: -55 dB (20 to 20 kHz, mic input) * Metering: Dual-LED VU Meter for Left and Right, calibrated to -10 dBV output * Phantom: 24…
…nominal, +26 dBu max. * Level control: Off to 12 dB gain above nominal * Output: Stereo on dual RCA jacks, -10 dBV nominal, +17 dBV max. * Frequency Response: 10 Hz to 50 kHz (ñ0.01 dB) * THD+N: 50 dB (50 Hz to 120 Hz) * Metering: Dual-LED VU Meter for Left and Right, calibrated to -10 dBV output *
…dB gain * Outputs (2): -10 dBV nominal on RCA jacks or Mini jack, +16 dBV max. without compression, -4 dBV max. with 20 dB compression * Frequency Response: 80 Hz to 40 kHz (ñ1 dB, mic input, -6 dB at 20 Hz with integral high-pass filter), THD+N: 55 dB (20 to 20 kHz) * Metering: Dual-LED VU Meter,…
…dB gain * Outputs (2): -10 dBV nominal on RCA jacks or Mini jack, +16 dBV max. without compression, -4 dBV max. with 20 dB compression * Frequency Response: 80 Hz to 40 kHz (ñ1 dB, mic input, -6 dB at 20 Hz with integral high-pass filter), THD+N: 55 dB (20 to 20 kHz) * Metering: Dual-LED VU Meter,…
…Color coded LEDs above each level meter bargraph display indicate which channels are selected for monitoring and to which speaker they are assigned. Audio phase relationships are indicated by a bi-color (RED/GREEN) LED on the front panel. Audio input selection status is indicated by LEDs in close proximity…