This versatile cable tester checks most varieties of audio cables. Can test cables with any combination of XLR, 1/4~ or RCA Phono plugs for shorts, opens and phase. Hands-free design allows manipulation of cable to locate intermittents. An On/Off switch is provided, with LED to indicate sufficient testing…
A microphone input tester consisting of tone generator and phantom power detector built into a standard 3 pin XLR male connector. When inserted into a microphone input connector, the LED indicator will light showing that there is a phantom power voltage present. If a voltage is present, a 1kHz tone…
The intelligent, CPU-controlled CT100 accepts virtually any connector type: XLR, mono and TRS phone (1 /4 ", 1 /8 ", TT), RCA and MIDI. It shows which input pin is connected to which output pin. Separate LED's indicate proper shield connection and phantom power presence. The CT100 also offers an installed…
…SuperTest 10-Way audio cable tester enables quick and convenient continuity cable testing for all types of audio cables. Very nice (and rare) ability to test 5 pin XLR to 5 pin XLR that can also test between 5 pin and 3 pin XLR's - ideal for DMX cables or Sony Wireless XLR cables. Also tests both 4-pole…
…steel stage box, red LEDs and toggle switch. Checks microphone, speaker, instrument, balanced and patch cables for shorts, opens and proper phase. XLR male and female, 1/4~ mono and stereo, RCA phono jacks. Simple hands-free operation is perfect for the most demanding stage and studio abuse.
Whirlwind AESQbox AES/EBU Audio Line Tester The AESQbox is designed to provide a portable means of testing various aspects of AES-3 and S/PDIF digital audio systems. It generates AES-3 or S/PDIF output signals over a sample frequency range from 32kHz to 192kHz. Audio sources available for the signal…
Ebtech SWIZZ-CT Swizz Army 6-in-1 Cable Tester The 6-in-1 Swizz Army is the professional's choice for multifunction cable testers. It displays the exact wiring of any cable or adapter and even allows testing of cables installed inside building walls. Intermittent detection allows you to wiggle a cable…
The Whirlwind DCT-9 cable tester is the only low cost cable tester that provides a built-in test tone oscillator for a fast and accurate way to automatically test any varieties of cables. The digital test program analyzes cables for correct wiring and displays any faults on the numeric display. Test…
…-format automatic cable tester. Simple to operate, the CT3 tests a plethora of cable and connector types from BNC through to RJ45. Simply connect each end of a cable to the appropriate connector and the CT3 will automatically report the status of the cables integrity. Many cable testers usually require access…
World's First Tester Featuring FireWire and CAT5 in the same box! Tests cables with any combination of 6-Pin FireWire (IEEE 1394), Category 5/6, S-Video, BNC, RCA, Phono, F, XLR (point to point), Phone and Mini connectors. Tests for shorts and intermittent operation. LED illuminates indicating a passing…
…another TecNec exclusive, the CBL-4TEST, delivers a compact, clever solution to an age old field problem. This unit tests Male or Female 4-Pin XLR Power Cable tester for 12VDC Power and fits in your shirt pocket. Features a simple dual color Green and Red LED for status confirmation. Green confirms correct…
…to a system with Phantom Power, the LED on the back will light. If it does not light then phantom power is not present. * OUTPUT: Unbalanced 3 pin XLR Male * OUTPUT LEVEL: Continuous @ 24.5mV (-32.2dBV) * FREQUENCY RANGE: 20Hz - 20kHz * TYPICAL FLATNESS: +/-1dB 31Hz - 20kHz; +1/-2dB 25Hz * POWER REQUIREMENTS…
CS1000 Cable Scanner Cable Tester/Test Tone/Phantom Verifier CS1000 Cable Scanner The CS1000 is a price/performance breakthrough in the cable maintenance, signal testing market. It tests ten different types of cable ends. Each cable being tested has its pinout scanned for continuity as well as proper…
The Rolls PM55 mixes a stereo or mono line-level Monitor signal with a mic level XLR microphone signal to a set of headphones or earphones. It has a monitor level control, mic level control, mic pass through XLR jacks, two headphone output jacks, and a stereo TRS 1/4" monitor input jack. The PM55 is…
The SC48RJ Tester provides rapid, positive testing for NL4 and NL8 type multiline speaker cables, RJ45 type data cables and XLR cables. Rotating the central switch applies voltage to the cable conductors one at a time. A SEND LED indicates the pin to which the voltage is being applied, and a RECEIVE…
Whirlwind AESQbox AES/EBU Audio Line Tester The AESQbox is designed to provide a portable means of testing various aspects of AES-3 and S/PDIF digital audio systems. It generates AES-3 or S/PDIF output signals over a sample frequency range from 32kHz to 192kHz. Audio sources available for the signal…
The Whirlwind DMX35T cable tester checks 3 and 5 pin XLR DMX lighting cables and also indicates the presence of the DMX DATA signal when connected to a functioning control line. 3 pin XLR jacks also test microphone cables for opens, shorts or reversed connections.
Hosa CBT-375 Audio Cable Tester * Use to test the continuity of an audio cable with the press of a single button * XLR, 1/4 in TS/TRS, RCA, 3.5 mm, Speakon, and banana jacks * Tests any cable that can be plugged into it
MCT-7 CABLE TESTER This diagnostic cable tester has connectors for analyzing almost any type of cable combination. The convenient rotary switch allows testing of each conductor within the cable and can determine the internal wiring configuration. Tests NL4, 5 pin DIN, BNC, XLR, TRS, RCA and 3.5 mm types…
Cable Tester (JIB/CT) was designed to test cables quickly and simply. The CT tests 6 different types of cables, XLR, 1/4", RCA, 1/8", Speakon, and DIN (Midi). The CT features a specially designed microprocessor, which tests a cable 200 times per second. [ A simple 'Pass/Fail' indicator lights up when…
…cable. Features * 2 x Neutrik XLR Male * 2 x Neutrik XLR Female * 2 x DMX 5-Pin * 2 x Speakon * 4 x 1/4" TRS * 4 x 1/8" (3.5mm) TRS * 4 x RCA * 2 x 5-Pin DIN/MIDI * 2 x BNC * 2 x RJ11 * 2 x RJ45 * 2 x Rotary Attenuators * DC Voltage Generator * Banana Plug Continuity Tester * Signal Generator 100Hz/1kHz…