…sound quality. Analog inputs are sourced from the eight combo jacks as either XLR mic or 1/4" TRS balanced line inputs. In addition, analog channels 1 and 2 provide easily accessible 1/4" TS instrument jacks on the front panel. Eight 1/4" TRS connectors provide balanced line outputs for monitoring and…
…low noise input channels has up to 48 dB of clean gain with signal present and clip LED indicators. Inputs can be either XLR balanced or 1/4-inch TRS. Each of the 1/4-inch TRS outputs is buffered low impedance balanced. The USB Dual Pre can be powered from an internal 9 Volt battery, or from the USB…
…-amps, and mixers, the M-Patch 2 front panel rotary controls allow precise level adjustments for two input sources. Featuring balanced comboXLR/TRS input jacks and XLR outputs, RCA & 3.5mm jack inputs, mono/stereo summing switch, Mute switch, A/B output pairs, and a built in stereo headphone amplifier…
…-amps, and mixers, the Nano Patch is designed to allow precise level adjustments to analog audio source material. Featuring balanced comboXLR/TRS input jacks and TRS outputs, mute switch, and a good sized rotary volume encoder, the Nano Patch is simply one of the most affordable improvements you could…
…combining 3 pole XLR receptacle and 1/4" jack in the smallest available XLR housing. Features & Benefits * Combined 3 pole XLR receptacle and 1/4# TRS phone jack for balanced mic and line or instrument inputs in one XLR housing * Dramatic space saving - 15% over the predecessor Combo * Two connectors…
…Two XLR/TRS "combo" jacks with clean, neutral preamps provide input for guitars and microphones, with individual 48V phantom power for each input. Two additional quarter-inch (TRS) analog inputs let users connect a keyboard, drum machine, or other line-level instrument. Four quarter-inch (TRS) analog…
…the microphone signals truly unchanged. The OctaMic II includes some significant enhancements compared to the OctaMic: * The balanced TRS inputs of the Neutrik ComboXLR jacks are phantom power-free and can be operated as real line inputs too. The improved design of the input circuits allows for a maximum…
…" TRS jack and XLR via Neutrik combo jacks, servo-balanced, completely symmetrical, DC-coupled signal path * Output AD: ADAT optical or SPDIF optical, SPDIF coaxial, AES/EBU compatible * Input DA: ADAT optical or SPDIF optical, SPDIF coaxial, AES/EBU compatible * Output DA: 1/4" TRS jack and XLR, servo…
…signal localization. Inputs are provided on XLR / TRScombo jacks to allow easy interconnection with the A/B5.1 Surround Switcher, or other equipment, in any environment. Features: * Six balanced inputs on comboXLR / TRS jacks * Six balanced outputs on XLR's * Stepped level control that tracks to .05dB…
…laptop computer. Four high-definition XLR microphone inputs include phantom power for detailed recording with condenser microphones. All channels can be passed to your computer with 96kHz/24-bit audio resolution. Each input on the US-600 uses an XLR/TRScombo jack to support microphone or line level…
…addition, an XLR / 1/4" combo jack allows for a stereo input signal on the 1/4" connector, allowing a single cable to feed the SPEAKEASY R1. This provides a convenient way to insert the SPEAKEASY R1 into an existing cart setup with a headphone feed from a mixer using a 1/4" TRS to TRS cable. Two DC…
…likes of which the industry has not seen to date in this class. There are two types of stereo microphones built into the R-26, plus a pair of XLR/TRScombo inputs for external mics, and an input for a stereo plug-in powered mic. Choose simultaneous combinations of the built-in mics (directional and…
…of M3R stereo receivers can operate on the same frequency with a single M3T stereo transmitter. The M3T Stereo Transmitter is equipped with two XLR/¬" combo input connectors into which users can connect line-level inputs (from a mixing console, for example). The M3T also offers a headphone output that…
…of M3R stereo receivers can operate on the same frequency with a single M3T stereo transmitter. The M3T Stereo Transmitter is equipped with two XLR/¬" combo input connectors into which users can connect line-level inputs (from a mixing console, for example). The M3T also offers a headphone output that…
…powerful desktop studio. * Eight XLR/TRS "combo jack" mic inputs - connect up to eight mics, or mix and match mics with guitars, synths, drum machines and other analog input signals. * Flexible analog inputs - each provides a crystal-clear preamp (for both the XLR and TRS input), 24-bit 96 kHz converters…
…Frequency Range (-10 dB): 39 Hz -20 kHz * Frequency Response (?3 dB): 42 Hz - 18 kHz * Input Connectors: 2 x 1/4" TRS phone jacks balanced/unbalanced 1 x XLR / 1/4" TRScombo jack with XLR loop through * Input Impedance: 14k ohms * Signal Indicators: Limit: Red LED indicates limiter active condition *…
…channels of I/O * Four mic inputs (two XLR mic/DI combo, two XLR) with professional-grade mic preamps, 48V phantom power, and high-pass filters * Four 1/4" TRS line-level inputs * Two unbalanced Alt line-level inputs (two RCA, one stereo mini 1/8") * Six balanced 1/4" TRS line-level outputs * Two 1/4" stereo…
…may still be achieved with the volume control. An XLR / 1/4" TRScombo jack is provided for convenience, and is wired in the standard balanced configuration of Pin 1/Sleeve: Ground, Pin 2/ Tip: Audio +, Pin 3/Ring: Audio -. Mic level input: The XLR mic level input will accept a common balanced mic level…
…preamps with award-winning M-Audio Octane technology * 8 XLR/TRScombo jacks for mic or line-level inputs * 20dB pad on each preamp * Signal/peak LED indicator lights * +48V phantom power * 2 front-panel ¬" instrument inputs * 8 balanced TRS analog outputs * 2 analog inserts * S/PDIF digital I/O * Built…
…/return loops for outboard gear -- with no latency. * Two combo jacks provide hi-Z 1/4" guitar input or low-Z XLR mic input with phantom power, pad and plenty of gain. * Eight 24-bit 192kHz analog inputs and outputs on balanced/unbalanced 1/4" TRS jacks * Precision Digital Trim -- Digitally controlled analog…
…Low Cut and Phase switches make these units first choice even for studio use! QuadMic offers 4 balanced microphone and line inputs via Neutrik XLR/TRScombo jacks. Each channel contains switches for 48V phantom power, a low cut filter, and phase reversal. Amplification can be set between 10 and 60 dB…
…With quality and performance that far exceeds its size and price, QUAD-CAPTURE stands at the head of its class. * Two comboXLR/TRS inputs with premium mic preamps (VS Preamps), two TRS outputs, coaxial I/O, headphone out, and MIDI I/O * Graphical Control Panel software provides fast, intuitive control…
…the TASCAM US-200.Specifications:* 2-in/4-out USB 2.0 Audio/MIDI Interface* 96kHz/24-bit audio resolution* Two mic preamps with phantom power, XLR/TRScombo jacks* Four unbalanced RCA outputs* MIDI input and output* Signal Present and Overload meter LEDs on each input* Line Out/Phones level control*…