Kessler REV 2 Pan and Tilt Head - 1000 Series

ITEM #: KESS-REV2-1000 MFG #: REV2-1000

Primary Image
  • Product Image Thumbnail 1 of 3
  • Product Image Thumbnail 2 of 3
  • Product Image Thumbnail 3 of 3

This item is no longer available.
Ask a Markertek Expert if you need assistance finding an appropriate substitute.

(800) 522-2025Email

Items similar to the KESS-REV2-1000

REV2-1000 - Overview

Originally, when we designed version one of this product, it was to be used in the underslung position on cranes. However, because of the ability to use it for shooting a time-lapse, people started to use it in the over-slung position. In this position, the centre of gravity is higher. This forces you to ensure your base is secure because as your setup gets higher, the more unstable it becomes.

In order to make the head more suitable for shooting in the over-slung position, we have made a few modifications. The first thing that we have changed is the motor position. The Pan axis motors are now inverted, which enabled us to lower the mounting area by 3.75" to 1.75". If you are wanting it even lower and do not need the cables to pass through, you can lower it to a 1/4" by removing the stand offs. To do this, you need to remove the four screws on the base plate and then remove the four screws on the mounting plates. Once you have done this, you can attach the base plate directly to the column on the head to achieve the 1/4" configuration.

Another modification we made is an adjustable Tilt support arm so you can lower the camera platform by 4". There are 5 different heights you can choose between using the available lock pockets. This helps you fine tune the height you desire.To lower, simply loosen the screw on the tilt arm and fine tune the height.

In its lowest configuration, it is about 8" shorter than the height of version one, which is almost half the height of version one. However, if you are wanting to have access to the original size, if you are using a larger setup, such as a long lens or matte box, you simply loosen the screw and adjust to the height you desire. By raising the height, you can gain access to more movement if desired when shooting with a larger camera configuration.

For example, when a stripped down DSLR is attached you have full access to the movement. However, when you attach a matte box, you will need to raise the head to achieve the clearance height needed.

One great feature of this system is the ability to order either the 500 series motor or 1000 series motor. The standard motor is the 500 series and is what has been used with version one of the head. It is a good all around motor, however, if you are either shooting on a long lens or primarily shooting time-lapse, you may want to look at getting the 1000 series motor. Basically, the difference is that the 1000 goes half the speed with twice as much torque as the 500. This allows you to do very precise moves.

There are a few different mounting options. The first is to use the Kwik Release System. The second is to mount directly to your sliders and cranes. Use the bolts provided in each case. For the CineSlider, use the four screws included with CineSlider . To mount to the KC-Cranes, use the bolts and wing-nuts provided with the Rev 2. You can also use a ball mount to attach it as well. You can then mount the head to anything with a ball mount, such as a tripod, Pocket Jib or Shuttle Pod.

  • Features:

    • REV 2 Head Features & Specifications
    • NEW Low Profile Design
    • Removable stand-offs for even lower profile (when cable pass-through is not needed)
    • Adjustable Tilt arm with 4" of adjustment including 5 different heights
    • Choose between 500 or 1000 series motor for different applications
    • Billet aluminum with stainless steel hardware construction.
    • Dual motors for each axis, provide zero backlash and 100% holding power (no drifting).
    • Continuous 360 degree movement on both pan and tilt.
    • Superior Dynamic Range. Unit is both faster and slower than other heads at similar price point.
    • Ball bearing and belt drive to eliminate gear to gear noise.
    • Pass-through axle points, for easy cable routing.
    • Cabling is CAT5 / CAT6 cable with RJ45 connectors (standard network cable). NO EXPENSIVE PROPRIETARY CABLES!!-
    • Unit Weight: 10 lbs.
    • Weight Capacity: 20 lbs.

    • ORACLE Controller Supported Features & Specifications:
    • Backlit LCD display with menu and setting values.
    • Fully adjustable controls for Max Speed, Dampening, & Dead Band.
    • Movement Recording / Memory Function with three memory banks.
    • Battery meter for ORACLE battery
    • SmartLapse WYSIWYG (What You See Is What You Get) Timelapse mode
    • Assignable Premium Multi-Function Joystick controls
    • Built-in intervalometer with stand alone, continuous motion, shoot-move-shoot, & stop motion modes (requires Camera Control Module accessory).
    • Intervalometer capable of 0.25 sec exposure time for fast shutter (if camera can support the frame rate)
    • 2nd axis control while in "Slider" Mode. Control slide and one axis of Revolution Head or Turntable with one ORACLE controller.
    • Cabling is CAT5 / CAT6 cable with RJ45 connectors (standard network cable). NO EXPENSIVE PROPRIETARY CABLES!!
    • Powered by standard AC power supply with wall plug, or optional 12v DC adapter and battery pack.
    • As of firmware v2.06.1SL, you can control the elektraDRIVE motor of a slider and one axis of the Revolution Head or the Turntable while in slider mode. To perform 3-axis movements with both the Revolution Head and a elektraDRIVE motor for a slider at the same time, you will need two controllers.
    • To utilize the intervalometer functionality of the ORACLE, you will need the Camera Control Module.
     

REV2-1000 - Required Accessories

    California Residents:
    WARNING:
    Cancer and Reproductive Harm - www.P65Warnings.ca.gov