Neutrik NXP2TX XIRIUM PRO Transmitter Base Unit

ITEM #: NXP2TX MFG #: NXP2TX

Primary Image

This item is no longer available.
Ask a Markertek Expert if you need assistance finding an appropriate substitute.

(800) 522-2025Email

Items similar to the NXP2TX

NXP2TX - Overview

Audio transmission with the quality of a recording studio - without compression!

XIRIUM PRO combines digital transmission facilitating the highest possible sound quality, reliability, and outstanding performance in one unique solution. As a true replacement for cable bound systems it eliminates the often difficult and time consuming task of running cables.

With DiWA (Digital Wireless Audio) Neutrik has developed a technology for digital data transmission achieving high fidelity without data compression. A digital, uncompressed audio stream of 24 bit/48 kHz requires a bandwidth of 1.15 MHz. Such an amount of data can not be transmitted in the UHF band without using a compander. By choosing the 5 GHz band XIRIUM PRO provides 20 MHz bandwidth. Despite employing wireless technology, audio signals are transmitted at the level of quality found in a recording studio.

The NXP2TX is a XIRIUM PRO US Transmitter TX Base Station. When RF congestion at a venue or event is at its worst, activate the exclusive XIRIUM PRO XROC feature and eliminate any opportunity for offending RF traffic to affect your wireless audio signal.

Available for iPad and Android tablets, the user friendly XIRIUM PRO app provides enhanced setup functions and allows monitoring and control of XIRIUM PRO devices.

  • Features:

    • Superior audio quality
    • Digital audio at 5 GHz
    • Proprietary protocol
    • Correction algorithm
    • Repeater unit overcomes barriers and offers extended diversity
    • XROC
    • Software App allows to optimize transmission power and live monitoring
    • Easy setup - time and money saver for awkward cable solutions
    • Modular I/O concept
    • Flexible power supply
     
  • Specifications:

    • General
    • Radio frequency carrier range: IEEE 802.11a, UNII-1 band from 5200 MHz to 5250 MHz (channels 40-48) and UNII-3 band from 5725 MHz to 5825 MHz (channels 149-165), license-free
    • Data protocol: Proprietary (DiWA technology)
    • Transmit power: Conducted 26 dBm / 32 dBm (with 6 dBi antenna) / 35 dBm (with 9 dBi antenna), FCC compliant
    • Range: Up to 1000 m point to point (LOS), longer range depending on obstacles, reflexions, interferences, XROC mode

      Audio Performance (Analog to Analog Per Wireless Link)
    • THD + Noise (TX Gain = min.): < 0.01 % @ 1 kHz, 4 dBu / < 0.05 % @ 20 Hz - 10 kHz, 4 dBu
    • Frequency response: +0.5 dB / -1.5 dB @ 20 Hz - 20 kHz ref. 1 kHz
    • Dynamic range: > 105 dB @ 1 kHz, A-weighted
    • Crosstalk: < -80 dB @ 20 kHz
    • Number of audio channels @ 24 mbps: 2
    • Number of audio channels @ 6 mbps: 1 (XROC mode)
    • Converter resolution (ADC & DAC): 24 bit
    • Sampling rate: 48 kHz
    • Latency (Delay): 3.6 msec (analog to analog)
    • Transmission method: Compression-free, no reduction of converted data
    • Operating temperature: 32° F to +122° F
    • Storage temperature: -4° F to +176° F

      Additional Digital Audio Interfaces
    • AES/EBU: 24 bit / 48 kHz according to AES3-2003
    • Dante AoE (Audio over Ethernet): proprietary protocol by Audinate

      TX Specific Characteristics
    • Antenna 5-6 GHz - Audio Transmission: Omni-directional, 6 dBi, 25° Elevation and 360° Azimuth, N-connector male (direct mount)
    • Antenna 2.4 GHz - Monitor & Control: 1/2 wave dipole with SMA female connectors
    • Number of audio channels @ 24mbps: 2
    • Number of audio channels @ 6mbps: 1 (XROC mode)

      Analog Input
    • Input Impedance: 10 kOhm
    • Rated Source Imp.: 1000 Ohm
    • Max.: 22 dBU
    • Connector type: XLR

      Physical
    • Indicators: LEDs: Power ON / Start Up / Low Battery Status / XROC mode / Linking Process / Audio transmission
    • Controls: Power ON / Linking Process / XROC mode
    • Power Supply: Mains input over powerCON TRUE1 (100-240 VAC 50/60 Hz) or internal battery (typical battery runtime 10 hours, depending on type of module, transmission power settings, XROC mode, number of charging cycles and operating temperature)
    • Dimensions (w x h x d): 5.6 x 2.5 x 9.7 in (without antennas)
    • Weight: 1.59 lbs
     

NXP2TX - Required Accessories

    California Residents:
    WARNING:
    Cancer and Reproductive Harm - www.P65Warnings.ca.gov