Marshall VAC-HT12-KIT HDbaseT Transmitter and Receiver Kit for video capture

ITEM #: MAR-VAC-HT12-KIT MFG #: VAC-HT12-KIT

Primary Image
  • Product Image Thumbnail 1 of 4
  • Product Image Thumbnail 2 of 4
  • Product Image Thumbnail 3 of 4
  • Product Image Thumbnail 4 of 4

This item is no longer available.
Ask a Markertek Expert if you need assistance finding an appropriate substitute.

(800) 522-2025Email

Items similar to the MAR-VAC-HT12-KIT

VAC-HT12-KIT - Overview

The Marshall VAC-HT12-KIT 4K HDBaseT Extender Kit allows you to extend 4K HDMI signals, RS232 and infrared
control signals up to 100m (328 ft). The VAC-HT12-KIT consists of two units: the VAC-HT12-T Transmitter and VAC-HT12-R Receiver. The VAC-HT12-T combines HDMI with IR remote control & RS232 over a single CAT5e/6/6a/7 cable. The VAC-HT12-R receives and separates HDMI, IR remote control & RS232 signals and provides
12VDC (max 1A) accessory power. HDCP (High-bandwidth Digital Copy Protection) and EDID (Extended Display Identification Data) is
passed transparently.

  • Features:

    • Supports HDMI Deep Color, full 3D & 4K2K@30 fps (HDBaseT)
    • Can extend 4K30 4:4:4 8-bit or 4K60 4:2:0 8-bit up to 100M via CAT6a/7 cable, 1080p30 4:2:2 12/16-bit up to
    • 100M via CAT5e/6 cable or 1080p30 to 4K30 4:4:4 8-bit and 4K60 4:2:0 8-bit up to 70M via CAT5e/6 cable
    • Supports PoC(Power over Cable) which can power both units from TX or RX side with power supply
    • HDCP & EDID pass through
    • CEC support
    • Auto equalization
    • Pure unaltered and uncompressed 7.1ch digital HDMI over CAT5e/6/6a/7 cable transmission
    • DTS-HD Master Audio and Dolby TrueHD high bit rate audio support
    • Supports full frequency IR signal from 20KHz to 60KHz
    • Bi-directional IR path-through
    • Full duplex RS-232 control up to 115,200 bps through connector
    • Wall mounting housing design for easy and secure installation
    • 12VDC 1A power available at both Tx and Rx for cameras, controllers & accessories
     

  • Specifications:

    • HDMI compliance: HDMI 1.4 full 3D & 4K2K@30
    • Video bandwidth: Single-link 340MHz [10.2Gbps]
    • SDI: 480i/576i
    • HD: 720p50/59.94/60 1080i50/59.94/60 1080p23.98/24/25/29.97/30
    • 3G: 1080p50/59.94/60
    • 4K: 3840x2160/29.97p/25p
    • Audio support: Surround sound [up to 7.1ch) or stereo digital audio
    • Equalization: Auto
    • Input TMDS signal: 1.2 Volts [peak-to-peak]
    • Input DDC signal: 5 Volts [peak-to-peak, TTL]
    • ESD protection: [1] Human body model - ±19kV [air-gap discharge] & ±12kV [contact discharge] [2] Core chipset - ±8kV
    • PCB stack-up: 6-layer board [impedance control - differential 100Ω single 50Ω]
    • IR pass-thru: Bi-directional
    • RS-232 support: Yes
    • PoC support: Yes
    • Input: 1x HDMI / 1x 3.5mm IR RX 1x RJ-45 / 1x 3.5mm IR RX
    • Output: 1x RJ-45 / 1x 3.5mm IR TX 1x HDMI / 1x 3.5mm IR TX
    • In / Out: 1x RS-232 1x RS-232
    • HDMI source control: Controllable via IR pass-through from RX to TX with IR extenders
    • HDMI connector: Type A [19-pin female]
    • Min DIN connector: DIN-9
    • RJ-45 connector: WE/SS 8P8C (Reverse Mode)
     

  • Item Includes:

    • VAC-HT12-T Transmitter and VAC-HT12-R Receiver
    • 1x IR blaster
    • 1x IR receiver
    • 1x DC24V 2.7A in-line power supply with C7 power cord
    • 1x User Manual
    • 2x power adapter to 2-pin terminal block
    • 2x 4-pin female terminal block
     

  • GTIN:

    0801813185980
     

Required Accessories

VAC-HT12-KIT - Required Accessories

    Recommended Accessories

    Similar Products

    California Residents:
    WARNING:
    Cancer and Reproductive Harm - www.P65Warnings.ca.gov