Studio Technologies Model 370 Dante-Supported 2-Channel Intercom Beltpack

ITEM #: STCH-370 MFG #: 370

Primary Image
  • Product Image Thumbnail 1 of 5
  • Product Image Thumbnail 2 of 5
  • Product Image Thumbnail 3 of 5
  • Product Image Thumbnail 4 of 5
  • Product Image Thumbnail 5 of 5

This item is no longer available.
Ask a Markertek Expert if you need assistance finding an appropriate substitute.

(800) 522-2025Email

Items similar to the STCH-370

370 - Overview

The Model 370 Intercom Beltpack starts with the features required of traditional broadcast 2-channel party-line (PL) intercom user devices and adds the advanced performance and capabilities that Dante audio-over-Ethernet provides. Over a standard IP network, multiple Model 370 units can be used in PL intercom applications with help from an external Dante-enabled audio matrix. Or, units can be used "point-to-point" or directly interfaced with ports on compatible matrix intercom systems. Only a single Power-over-Ethernet (PoE) connection is required for operation. Key user features can be easily configured including preamplifier gain, talk button operation, and headphone signal routing. User features include integrated sidetone, remote microphone off, and call alerting. This capability, along with the great audio quality provided by the digital audio signal path, offers a superior user experience.

  • Features:

    • Dante audio-over-Ethernet technology
    • Two independent talk and listen channels
    • 5-pin female XLR headset connector
    • Integrated call function
    • Configurable operating parameters
    • Power-over-Ethernet (PoE) powered
     
  • Specifications:

    • General
    • Audio Channels: 2 talk, 2 listen
    • Power Source: Power-over-Ethernet (PoE): class 1 (very low power, ≤3.84 watts)
    • Dimensions (W x H x D): 3.6" x 1.6" x 4.8"
    • Mounting: intended for portable applications; contains integral belt clip; optional mounting bracket kit allows Model 370 to be permanently mounted
    • Weight: 0.6 pounds (0.3 kg)

      Network Audio Technology
    • Type: Dante audio-over-Ethernet
    • Bit Depth: up to 24
    • Sample Rate: 48 kHz
    • Number of Transmitter (Output) Channels: 2
    • Number of Receiver (Input) Channels: 2
    • Dante Audio Flows: 4; 2 transmitter, 2 receiver

      Network Interface & Microphone Input
    • Type: twisted-pair Ethernet, Power-over-Ethernet (PoE) supported
    • Data Rate: 100 Mb/s (10 Mb/s Ethernet not supported)
    • Type: unbalanced, for use with dynamic microphones
    • Gain: 40 or 46 dB, selectable, ref. -60 dBu input to Dante output (-20 dBFS nominal)
    • Frequency Response: 50 Hz to 10 kHz, -3 dB
    • Distortion (THD+N): <0.02%
    • Dynamic Range: 75 dB

      Compressor
    • Threshold: 1 dB above nominal level (-19 dBFS)
    • Slope: 2:1
    • Status LED: compressor active

      Headphone Output
    • Type: dual-channel
    • Compatibility: intended for connection to mono or stereo headsets or earpieces with nominal impedance of 50 ohms or greater
    • Maximum Output Voltage: 3.8 Vrms, 1 kHz, 150 ohm load
    • Frequency Response: 20 Hz to 10 kHz, -3 dB
    • Distortion (THD+N): <0.002%
    • Dynamic Range: >100 dB

      Call Signal Support
    • Method: 20 kHz, ±800 Hz, within audio channels
    • Call Send Level: -20 dBFS
    • Call Receive Level: -27 dBFS minimum

      Connectors
    • Headset: 5-pin female XLR
    • Ethernet: Neutrik etherCON RJ45
    • USB: type A receptacle (located inside Model 370's enclosure and used only for firmware updates)
     

370 - Required Accessories

    California Residents:
    WARNING:
    Cancer and Reproductive Harm - www.P65Warnings.ca.gov