Teradek BEAM 573 Low Latency Long Range HD-SDI Video Transmitter

10-0573 - Overview

• Features:

  • Wireless Video & Audio Transmitter
  • Supports Resolutions up to 1080p60
  • 2500' Distance with 90 ms-110 ms Latency
  • Uses License-Free 5 GHz Frequency
  • 3G-SDI Input
  • H.264 Encoded Transmissions
  • RTSP and MPEG-TS Streaming
  • RJ45 Ports for Wired LAN Transfer
  • 30 Mbps Bit Rate; 50 Mbps over LAN
  • Mic & Headphone Communication I/O
   

• Specifications:

  • Video
  • Video Inputs: 3G/HD/SD-SDI:BNC
  • Sdi Compliance: SMPTE 259M BI.656: SDTV Digital Signal/Data Serial Digital Interface; SMPTE 292M BT.1120: 1.5Gb/s Signal/Data Serial Digital Interface; SMPTE 425M: 3Gb/s Signal/Data Serial Digital Interface; SMPTE 299M: 16bit Digital Audio Format for SMPTE 292M; SMPTE 352M: Video Payload Identification for Digital Interfaces
  • Video Outputs: Looping 3G/HD/SD-SDI: BNC
  • Delay Tx To Rx: 90-110 milliseconds
  • Supported Resolutions: 1080p23.98/24/25/29.97/30/50/59.94/60; 1080PsF23.98/24/25/29.97/30; 1080i50/59.94/60; 720p23.98/24/25/29.97/30/50/59.94/60; 576i50 (PAL); 480i59.94 (NTSC)/480i60 (861-D)
    
    Video Processing
  • Video Compression: H.264 Baseline Profile Level; 4.2 with De-Interlacing
  • Supported Video Bitrate: RTSP Server - Up to 30Mbps; MPEG2-TS Server - Up to 15Mbps
  • Color Correction: None
    
    Inputs/Outputs
  • Main Digital Audio In: SDI embedded audio: 48kHz 16-bit stereo linear PCM Talk Back Analog Audio In; 8kHz 16-bit stereo linear PCM with mini stereo phone input/output jack
  • Main Digital Audio Out: SDI embedded audio: 48kHz 16-bit stereo linear PCM
    
    Interfaces
  • Http: Feature-rich WebUI for configuration and control
  • Configuration Interfaces: OLED Display with joystick Navigation buttons
  • Switches: On/Off and Reset Switch
  • External Control: Full duplex RS422 serial port
    
    Network
  • Ethernet: 10/100 BASE-TX, RJ-45 jack
  • Wireless: WiFi:IEEE 802.11a/n: OFDM; Frequencies - U-NII-1 (5.15-5.25 GHz), U-NII-3 (5.725-5.85 GHz); Wireless Protected Setup for easy set up and security configuration
  • Usb: Factory Reset; IP configuration or firmware upgrade without PC
  • Encryption: 802.1x, 802,11i, WPA2, WPA and WEP 64/128 TKIP 128bit AES
  • Rf Power: Aggregate Power: 150mW (22dBm), 50mW (17dBm)/antenna; Radio Standard - IEEE 802.11a/n: OFDM; Antenna - 3T x 3R MIMO, 3 antennas per WiMi6200TW/W1Mi6200RW
  • Range: 2500 ft ±200 ft
  • Unicast Multicast: Multicast; WiFi: Up to 4 Receivers; LAN: No limit on number of receivers
    
    Physical
  • Dimensions: 6.7" x 4.1" x 1.1"
  • Weight: 34.92oz
  • Power Input: 7V-17V DC
  • Nominal Power Consumption: 12 W
  • Operating Temperature: 0 - 50°C
   

• Item Includes:

  • 1 x Beam TX
  • 1 x Beam TX Gold Mount
  • 1 x Thumb Screw Plastic Head 1/14-20 Thread, 1.25 Length
  • 1 x Quickstart Guide - Beam
  • 3 x Antenna WiFi Beam TX/RX
  • 1 x Teradek Large Case
  • 1 x SDI - BNC to BNC Cable, 10 in.
  • 1-Year Warranty
   

• Warranty:

  • 1 Year