Comrex 9500-0660 DH30-I Digital Hybrid w/Acoustic Echo Cancel for Outside NA

ITEM #: CREX-9500-0660 MFG #: 9500-0660

Primary Image
  • Product Image Thumbnail 1 of 2
  • Product Image Thumbnail 2 of 2

This item is no longer available.
Ask a Markertek Expert if you need assistance finding an appropriate substitute.

(800) 522-2025Email

Items similar to the CREX-9500-0660

9500-0660 - Overview

Comrex 9500-0660 DH30-I Digital Hybrid w/Acoustic Echo Cancel for Outs

  • Features:

    • Remote controllable presets
    • Password protected
    • 24-bit digital signal processing (DSP)
    • AES/EBU digital or analog audio input and output
    • Record and Cue functions
    • Selectable auto mix-minus
    • Selectable acoustic echo cancellation
    • Selectable auto answer and disconnect
    • Integrated monitor amp with front-panel volume control
    • Remote control via contact closures or RS-232
    • Adjustable caller control (ducking)
    • Adjustable three-band equalizer
    • Adjustable compressor and expander
    • Bass boost
    • Microphone send and cue preamps
    • Automatically accepts all worldwide voltages
    • Three selectable presets for customized audio
    • Worldwide compliant including FCC, CSA, CE, CTR 21
     
  • Specifications:

    • Connections
    • Cue In: XLR Female, Mic/Line selectable, -55 or 0 dBu nominal, adjustable, balanced bridging, 20k Ohm impedance, selectable 12VDC phantom power
    • Caller Output: XLR male 0dBu nominal, adjustable, balanced, 50 Ohm impedance
    • Aux Output: XLR male 0dBu nominal, adjustable, balanced, 50 Ohm impedance
    • Telco Line: RJ-11 connector - POTS line or analog extension from a PBX or dry line (no DC offset voltage), A-Lead supervision provided
    • Telco Set: RJ-11 connector, A-Lead supervision provided
    • Remote: DB-25 Female
    • Remote Send Input: 0dBu nominal, adjustable, unbalanced, 20k Ohm impedance
    • Remote Caller and Aux Output: 0dBu nominal, adjustable unbalanced, 50 Ohm impedance
    • Control Inputs: Remotely activate any of the following functions with a simple switch closure to ground: On, Off, Cue, and Rec along with preset selection controls 1,2, and 3 or with Send, Caller, and Monitor Mute controls
    • Status Outputs: Remotely check the status of the hybrid using the On and Off status outputs. Status outputs are open collector outputs rated at 30VDC and 40mA maximum
    • Monitor Output: 1/4" stereo jack Tip=+phase, Ring=ground, Sleeve=ground, 1W output into an 8 Ohm load
    • Send Input: XLR female Mic/Line selectable, -55/0 dBu nominal, adjustable, balanced, bridging, 20k Ohm impedance
    • AES/EBU In: XLR, Pin 1=ground, Pin 2=+phase, Pin 3=-phase; 32, 44.1, or 48 kHz sample rate
    • AES/EBU Out: XLR, Pin 1=ground, Pin 2=+phase, Pin 3=-phase; 32, 44.1, or 48 kHz sample rate
    • RS-232: DB9 Female Connector, 9,600 baud rate, used for status and control via a PC or other RS-232 controller
    • Record Control: DB9 Female, Start, stop, and enable outputs are open collector outputs rated at 40VDC and 50mA maximum
    • Controls
    • LCD programming display, ENTER/ESC/st programming buttons, Monitor volume control, Send-level LED bar meter, Caller-level LED bar meter, Record, cue, Hybrid On/Off, Buttons with status LEDs

    • Telephone Transmit
    • All measurements referenced at -15 dBm level on the phone line
    • Frequency response: 250 Hz to 3.5 kHz, ±1 dB
    • SNR: >70 dB
    • Distortion: <0.15%
    • Telephone Receive
    • All measurements referenced at -15 dBm level on the phone line with caller processing options bypassed
    • Frequency response: 250 Hz to 3.5 kHz, ±1 dB
    • SNR: >70 dB
    • Distortion: <0.1%
    • Echo Cancellation/Mix-Minus
    • Tail time: 120 milliseconds
    • Null: 50 dB
    • Telco Cancellation
    • Tail time: 32 milliseconds
    • Null: 55 dB
    • Null
    • Send-to-Caller separation: 55 dB nominal
    • Tail time: 32 milliseconds
    • Power & Physical
    • Power: IEC Type, Auto Adjusting 100-240VAC, 2A, 50/60 Hz, 30W
    • Dimensions: 17.125" L x 10.125" D x 1.75" H (43.5 cm x 25.7 cm x 4.44 cm
    • Weight: 6.7 lbs (3.04 kg)
    • Operating Temperature: 32-100° F (0-38° C)
    • Operating Humidity: 0-80 percent
     
  • Item Includes:

    • Power cord
    • 7' telco cable
     

9500-0660 - Required Accessories

    California Residents:
    WARNING:
    Cancer and Reproductive Harm - www.P65Warnings.ca.gov