WILLIAMS AV PLA DL210 SYS 1 Large-Area DSP Induction Loop System with Network Control

ITEM #: WLS-PLADL210SYS1 MFG #: PLA DL210 SYS 1

Primary Image

This item is no longer available.
Ask a Markertek Expert if you need assistance finding an appropriate substitute.

(800) 522-2025Email

Items similar to the WLS-PLADL210SYS1

PLA DL210 SYS 1 - Overview

The PLA DL210 SYS 1 from WILLIAMSAV is a large-area DSP induction loop system with network control via Ethernet or RS-232 for seamless, remote operation.

The Digi+Loop induction loop system is the first of its kind to maximize modern amplifier technology. DSP audio processing offers flexible, powerful software control of mixing, equalization, compression, loop phase shift and more. Powerful Class D, pulse-width amplifiers maximize efficiency, and reduce size and weight. And network control capability provides seamless, remote system set-up, operation and monitoring via laptop, tablet or other portable device. The Digi-Loop’s dual-amplifier design offers flexibility, with the option of single 12A output for perimeter loops or dual 10A outputs for loop arrays or one loop and one loudspeaker. Priority input (70-100V) is also available for connection to a paging system, ensuring life/safety announcements are heard loud and clear. And Digi-Loop is the only loop amplifier to offer an easy-to-read LCD graphic display.

  • Features:

    • Crestron control
    • DSP Audio Processing
    • Digital Inputs - AES3/EBU
    • LCD Screen with Metering
    • Ethernet or RS-232 control
    • USB for firmware updates
    • Mixing, Equalization, Compression, Phase, and Frequency-Shaping
    • Power-save mode
    • Master Gain Control
    • High output current: 12/10 amps
    • Active protection against short circuits
    • XLR input configurable as microphone input or line-input, balanced or unbalanced.
    • Standard 2RU, 19" rack enclosure
    • Magnetic signal couples directly to hearing aids equipped with telecoils (T-coils)
    • Can be used with optional loop receivers
    • Suitable for set-up of high or low-overspill systems, or interleaved arrays
    • Meets ADA / ADAAG guidelines
    • Meets IEC Specification 60118-4
     
  • Specifications:

    • EAR 013
    • Plug: 3.5 mm mono
    • Cord length: 39 inches
    • Impedance: 32 Ohms
    • Frequency Range: 20 - 20kHz
    • Max input power: 5mV
    • Sensitivity: 128dB @ 1kHz
    • Driver size: 13 mm
    • Weight: 9g
    • Replacement earpad: EAR 015
    • PLA DL210 NET
    • Dimensions: 2U rackmount, 19" W x 3.5" H x 12" D. Chassis is 17" W.
    • Weight: 14.3 lbs (6.5 kg)
    • Color: Case: Black, white and blue legends on front, white legends on back. LCD: Backlit Blue.
    • Fan Cooling: Variable Speed, Temperature Controlled
    • Power: 100-240 VAC, 50/60 Hz, 500 Watt
    • Heat Output: Sleep state: 83 BTU, Idle State: 112 BTU, Driving two loops @9A each: 286 BTU
    • Digital Input: (1x XLR); AES or EBU; 44.1kHz/48kHz
    • Analog Line Inputs: (1x RCA, L+R); -10dBV, 10kΩ input impedance
    • Mic/Line Inputs: (2x Phoenix Terminal Block); balanced or unbalanced. Input impedance: 1.5kΩ Mic, 10kΩ Line. Configurable/accepts Mic, Line +4dBu, Line +8dBu, or Line -10dBV.
    • 70-100v Input: (1x Phoenix Terminal Block); speaker-level input, for distributed audio systems.
    • Line Outputs: (2x Phoenix Terminal Block); loop-through of Mic/Line inputs 1 & 2. +4dBu. Balanced or Unbalanced.
    • Loop Outputs: (2x Phoenix Terminal Block).
    • Required Loop Resistance: 0.5Ω to 1.5Ω (DC)
    • Output Current (Loop): One Loop, Output A or B: 12A rms. Two Loops, Outputs A and B: 10A rms each
    • Output Power (Speaker): 50 Watts X 1 Channel @ 4 Ω (35 Watts @ 8 Ω). Class D.
    • Loop Frequency Response: 100Hz to 10kHz @400mA (Output A or B)
    • Speaker Frequency Response: 20Hz - 20kHz (Output A)
    • Speaker Dynamic Range: >90 dB; A-weighted, typical
    • Speaker THD+N: 0.07%; 50 watts into 4Ω @ 20-20kHz
    • Loop THD: <1% at nominal power output, 1kHz sine wave
    • Front Controls: Front LCD display menu access/adjustment via control dial.
    • Remote Control/Configuration: Ethernet, USB, RS-232. Application “PC Mixer App" supports all 3 protocols.
    • Ethernet: Standard RJ-45 jack.
    • RS-232: Standard DB-9 COM port connector.
    • USB: Standard-B jack. USB 1.1, 2.0 or 3.0 supported.
    • Approvals: CE, UL, ULC, FCC, Industry Canada, RoHS, WEEE, CB scheme
    • PLR BP 1
    • Dimensions: 4.1"H x 2.85"W x 1.38"D (104 mm H x 72 mm W x 35 mm D).
    • Weight: 4.6 oz (130 g) with batteries, 2.6 oz (73 g) without batteries.
    • Color/Material: Black ABS/polycarbonate molded plastic case.
    • Battery Type: (2) AA (1.5VDC) Alkaline or NiMH (rechargeable).
    • Battery Life: Up to 200 hours with Alkaline batteries.
    • LED Indicator: Green LED indicates power on, flashes when batteries are low.
    • Headphone Jack: 3.5mm stereo TRS jack works with mono or stereo headphones.
    • Volume control: External switched thumb wheel controls power on/off and volume level.
    • Tone control: Rotary control inside battery compartment (1kHz reference at 400mA/m input with Tone at mid position)
    • Induction Coil: Maximum reception: receiver oriented vertically
    • Power Output: 35mW (max) into 33 ohms mono impedance
    • THD: <2%
    • Frequency Response: 300Hz to 10KHz, -6dB
     
  • Item Includes:

    • (1) PLA DL 210 NET DSP Induction Loop Amplifier
    • (2) PLR BP1 Body-Pack Receivers
    • (2) EAR 022 Surround Earphones
    • (1) BAT KT6 Dual Drop-In Charger Kit
    • (1) IDP 009 ADA Wall Plaque (T-Coil)
     
  • Warranty:

    • 2 Years
     

PLA DL210 SYS 1 - Required Accessories

    California Residents:
    WARNING:
    Cancer and Reproductive Harm - www.P65Warnings.ca.gov