XIRIUM PRO US NXP-TM-ANA Transmitter TX Analog Line Input Module - Includes NKXPF-5-15-3 PowerCon Cable

ITEM #: NXPTMANA MFG #: NXPTMANA

Primary Image

This item is no longer available.
Ask a Markertek Expert if you need assistance finding an appropriate substitute.

(800) 522-2025Email

Items similar to the NXPTMANA

NXPTMANA - Overview

Whether the signal type is analog, digital (AES/EBU) or Dante, XIRIUM PRO offers modules to accept any of them. Signal types may also be converted from one type to another, simply by selecting the appropriate module. Need to transmit an analog signal and plug into a digital input? No problem. Select an analog input module for the transmitter, and the AES digital output module for the receiver. In fact, every receiver in a system can use a different output module, allowing for signal conversion to the type used by your device. The NXP-TM-ANA is a XIRIUM PRO US Transmitter TX Analog Line Input Module, including NKXPF-5-15-3.

  • Specifications:

    • General
    • Radio frequency carrier range: IEEE 802.11a, UNII-1 band from 5200 MHz to 5250 MHz (channels 40-48) and UNII-3 band from 5725 MHz to 5825 MHz (channels 149-165), license-free
    • Data protocol: Proprietary (DiWA technology)
    • Transmit power: Conducted 26 dBm / 32 dBm (with 6 dBi antenna) / 35 dBm (with 9 dBi antenna), FCC compliant
    • Range: Up to 1000 m point to point (LOS), longer range depending on obstacles, reflexions, interferences, XROC mode

      Audio Performance (Analog to Analog Per Wireless Link)
    • THD + Noise (TX Gain = min.): < 0.01 % @ 1 kHz, 4 dBu / < 0.05 % @ 20 Hz - 10 kHz, 4 dBu
    • Frequency response: +0.5 dB / -1.5 dB @ 20 Hz - 20 kHz ref. 1 kHz
    • Dynamic range: > 105 dB @ 1 kHz, A-weighted
    • Crosstalk: < -80 dB @ 20 kHz
    • Number of audio channels @ 24 mbps: 2
    • Number of audio channels @ 6 mbps: 1 (XROC mode)
    • Converter resolution (ADC & DAC): 24 bit
    • Sampling rate: 48 kHz
    • Latency (Delay): 3.6 msec (analog to analog)
    • Transmission method: Compression-free, no reduction of converted data
    • Operating temperature: 32° F to +122° F
    • Storage temperature: -4° F to +176° F

      Additional Digital Audio Interfaces
    • AES/EBU: 24 bit / 48 kHz according to AES3-2003
    • Dante AoE (Audio over Ethernet): proprietary protocol by Audinate

      TX Specific Characteristics
    • Antenna 5-6 GHz - Audio Transmission: Omni-directional, 6 dBi, 25° Elevation and 360° Azimuth, N-connector male (direct mount)
    • Antenna 2.4 GHz - Monitor & Control: 1/2 wave dipole with SMA female connectors
    • Number of audio channels @ 24mbps: 2
    • Number of audio channels @ 6mbps: 1 (XROC mode)

      Analog Input Mode - Line balanced
    • Input Impedance: 10 kOhm
    • Rated Source Impedance: 1000 Ohm
    • Max.: 22 dBU
    • Connector type: XLR

      Physical
    • Indicators: LEDs: Power ON / Start Up / Low Battery Status / XROC mode / Linking Process / Audio transmission
    • Controls: Power ON / Linking Process / XROC mode
    • Power Supply: Mains input over powerCON TRUE1 (100-240 VAC 50/60 Hz) or internal battery (typical battery runtime 10 hours, depending on type of module, transmission power settings, XROC mode, number of charging cycles and operating temperature)
     

Required Accessories

NXPTMANA - Required Accessories

    Recommended Accessories

    Similar Products

    California Residents:
    WARNING:
    Cancer and Reproductive Harm - www.P65Warnings.ca.gov