Multidyne HD-3000-TRX-ST 3G Two-Way Multi-rate HDSDI Over Fiber Optic Converter / Transceiver Over 2 Fiber Connections

ITEM #: HD-3000-TRX-ST MFG #: HD-3000-TRX-ST

Primary Image

This item is no longer available.
Ask a Markertek Expert if you need assistance finding an appropriate substitute.

(800) 522-2025Email

Items similar to the HD-3000-TRX-ST

HD-3000-TRX-ST - Overview

HD-3000-TRX
The transceiver model, designated by model number HD-3000-TRX, is essentially a -1TX (transmitter) and a -1RX (receiver) in the same enclosure, but without loopthru or DA connectors. It includes 1 fiber IN and 1 reclocked fiber OUT optical connector, one reclocked serial digital video OUT 75-Ohm BNC connector and one serial digital video IN 75 Ohm BNC connector. As on the transmitter, only signals above 125 MBPS should be applied to the BNC input. The -TRX front panel includes 2 groups of Rate and STATUS LEDs, one for the transmit
section and one for the receive section. Each includes Rate LEDs with the same functionality as on the other models. The receive section has an Optical Signal Strength STATUS LED, and the transmit section has a Carrier Detect STATUS LED, each with the same functionality as described for the other models.

The HD-3000 is a family of nine compact, portable fiber optic transmitters, receivers, and transceivers. The different modules can send one or two HD/SDI signals over individual fibers, or two signals over a single strand, one-way or bidirectionally. The unique HD-3000 "Drop & Repeat" unit allows a signal to be received at one location and continue on via fiber to one or more additional locations.


Applications:
Sports production
Remote camera links
Distance learning
OB Van Inter-connects
Pre-fibered venues
Courtesy feeds

Please note! For best performance over longer distances at the highest bit-rates, single mode fiber is recommended.

  • Features:

    • 3G HDSDI Transceiver
    • Drop and Repeat Functionality
    • OLED Display with Menu Driven Control and Configuration
    • Dual Re-Clocked Outputs & Loop Through
    • Cable EQ
     
  • Specifications:

    • Signal Count ...................... 1 or 2 (model dependant)
    • Data Rate............................................5 Mb/s to 3 Gb/s
    • Reclock & Automute ................ SMPTE 425M (2.97Mb/s), 292M (1.49Mb/s), ..259M-C (270Kb/s) (enable/disable via int. dip switch)
    • Input/Output Level...................800 mV (peak to peak)
    • Input/Output Impedance ................................75 Ohms
    • Return Loss................> 15 dB typical (5 - 1500MHz) .... > 10 dB typical (1.5 - 3GHz)
    • Cable Equalization (Gepco VSD2001/Belden 1694A):
    • 270 MHz ............................................ up to 500m
    • 1.5 GHz .............................................. up to 200m
    • 3 GHz ................................................. up to 150m
    • Nominal Optical Loss Budget Values
    • TX Laser output power (std./DFB)-5 dBm/0 dBm
    • RX Sensitivity, HD/SDI (bars)................ -22 dBm
    • Wavelengths................................... 1310nm (standard) .... 1310/1550nm (WDM) or 1271-1611nm (CWDM)
    • Fiber Compatibility...........Multimode or Single Mode (Single Mode recommended)
    • Dimensions (WxLxD)................. 2.75" x. 1.125" x. 5"
    • Weight...................................................................7 oz.
    • Power Input...................................................9-24VDC
    • Power Consumption.......................<5 watts@12VDC
    • Temperature Range .................................. 0° to +70°C
    • Humidity Range........... 0 to 95% RH, Noncondensing
    • Laser Safety .........................................Class 1 Laser
    • Other ................................................................RoHS
     

HD-3000-TRX-ST - Required Accessories

    California Residents:
    WARNING:
    Cancer and Reproductive Harm - www.P65Warnings.ca.gov