Panasonic AW-RP150GJ Panasonic Remote Camera Controller with 7 Inch Touchscreen

AWRP150 - Overview

• Features:

  • Large touchscreen for easy usability
  • New joystick for one-handed operation
  • Simplified PTZ camera presets and tracing memory
  • Intuitive design elements based on direct feedback from everyday robotic camera operators
  • 3G-SDI Active Through Output, 5 x RS-422, LAN PoE+, 2 x GPIOs
   

• Specifications:

  • Power Requirements: 12 V DC (10.8 V to 13.2 V)
  • PoE++: IEEE802.3at standard - DC 42 V to 57 V (Camera Input)
  • Current consumption: 1.0 A (Connector Input); 0.6 A (PoE+ power supply)
  • Ambient Operating Temperature: 32°F to 104°F
  • Ambient Operating Humidity: 20% to 90% (no condensation)
  • Storage Temperature: -4°F to 122°F
  • Weight: Approx. 3.2 kg (7.05 lb)
  • Dimensions (WxHxD): 13-15/32" x 7" x 9-21/32" (excluding protrusions)
  • Controller Supported Equipment: IP/RS422, AW-UE150W/K, AW-HR140*1, AW-HE130W/K*1, AW-HN130W/K*1, AW-UE70W/K*1, AW-UN70W/K*1, AW-HE40 Series*1, AW-HN40HW/HK*1, AW-HE38HW/HK*1, AW-HN38HW/HK*1
  • Input/Output Connector: DC 12 V / IN XLR 4-pin
  • Input: 3G-SDI IN / SMPTE292 / 75Ω (BNC x 1)
  • Input Supported formats: 1080/59.94p*2, 1080/50p*2, 1080/59.94i, 1080/50i, 1080/23.98p, 1080/25p, 1080/23.98PsF, 1080/25PsF
  • Output: ACTIVE THRU OUT SMPTE292 / 75Ω (BNC x 1)
  • Input/Output IP CONT: 100BASE-TX / PoE+ input
  • Connection cable: LAN cable, max. 100 m (328 ft) When connecting the unit via a switching hub:; Straight cable or a cross cable (category 5 cable), STP (Shielded Twisted Pair) cable recommended; When connecting the unit directly: Crossover cable (category 5 cable), STP (Shielded Twisted Pair) cable recommended
  • SERIAL CONT (RJ-45): RS-422 (control signals for remote cameras), TALLY OUT
  • Connecting cable: Straight cable (category 5e or better shielded cable), max. 1000 m (3280 ft)
  • TALLY OUT: Open collector output (negative logic) Maximum voltage resistance DC 24 V, Maximum current 50 mA
  • TALLY/GPIO 1: D-sub 25-pin, female, inch thread
  • TALLY IN: 10 inputs (for receiving photocoupler signals)
  • GPI: 6 inputs (for receiving photocoupler signals)
  • GPIO: 5 inputs (for receiving photocoupler signals) or 5 outputs (open collector outputs, negative logic) Input/output switched with menu settings
  • GPIO 2: D-sub 25-pin, female, inch thread
  • GPI: 10 inputs (for receiving photocoupler signals)
  • GPIO: 10 inputs (for receiving photocoupler signals) or 10 outputs (open collector outputs, negative logic) Input/output switched with menu settings
  • Reserve connectors: 2 connectors (For future expansion feature)
  • LCD Display: 7-inch Touch Panel GUI Monitor (WVGA (800×480) )
  • SD Memory Card slot: SDHC / SDXC Memory Card Slot x 1
  • No. of Connectable Cameras: 200 (IP), 5 (RS422)
  • No. of Camera Selection Buttons: 10
  • No. of Camera Groups: 20 (10 units per 1 group)
  • Preset Memory: No. of memory presets 100
  • Tracing Memory: No. of cameras Cam1 to Cam10; Recording time, no. of memory settings: Maximum 5 min. total per camera, maximum of 10 settings per camera
  • No. of User Assignable Buttons: 6 + up to 10 on the LCD menu
  • Pan / Tilt Speed Adjustment: 7 levels
  • Tally LED display color: green / red
   

• GTIN:

  0885170372009