Ward-Beck MLC8-N Multichannel Level Controller with Analog & AES/EBU In/Out & Ravenna Out 1RU

ITEM #: WARD-MLC8-N MFG #: MLC8-N

Primary Image
  • Product Image Thumbnail 1 of 2
  • Product Image Thumbnail 2 of 2

This item is no longer available.
Ask a Markertek Expert if you need assistance finding an appropriate substitute.

(800) 522-2025Email

Items similar to the WARD-MLC8-N

MLC8-N - Overview

The MLC8-N offers an eight channel on-ramp converter to a Ravenna AES67 network. Equipped with eight individual level controls as well as an overall master level control the MLC8-N allows proportional mixing of the input signals before delivery to the network. Audio input signals to the MLC8-N may be analog, balanced or unbalanced AES.

All signal levels are metered on the eight precision LED bargraph meters. This device is ideal for controlling your signals before inserting them into your network. It also offers the individual level controlled AES signals on the rear panel for further distribution. A line level analog audio output that may be fed to a stereo speaker system allows local monitoring of individual signals (solo) or the overall mix of the input signals.

  • Features:

    • Multichannel Level Controller w/Analog and AES/EBU Inputs and Analog, AES/EBU and Ravenna AES67 Outputs
    • Multi-channel level control surface that is designed to display the levels of multiple audio signals in a surround sound environment (5.1 + 2) and to provide acoustic mixing of these signals with overall global level control
    • Equipped with eight LED bargraph level displays, individual channel and master level control with mute function, level status LED indicators, presets and toggling between 5.1 and stereo listening, and 7.1 & 5.1 to stereo mix-down capability
    • All connections are made on the rear panel and all displays and operating controls are located on the front panel
    • Accepts AES, 110 balanced audio signals or analog audio signals. Operator must switch input selector to the type of signal being controlled.
    • Eight bargraph displays on the left-hand side show the level of the incoming signal. The factory setting for the bargraph meters is -20dBFs = 0. Field calibration of the meter for other nominal levels is achieved by using DIP switches on the rear panel
     
  • Specifications:

    • AES/EBU Inputs
    • Impedance: 110 Ohm transformer balanced
    • Level: 0.2 to 7V p-p
    • Max Input: 0 dbfs
    • Standard: AES31D-1995
    • Type: 3 Pin Terminal Block
    • Ravenna AES67 Output Terminal: RJ45
    • Power Input: 90-230 VAC,50-60 Hz

      Analog Output
    • Frequency Response: 1.5 dBu from 20Hz to 20kHz
    • Impedance: 60 Ohm Balanced
    • Max Output: 23.5 dBu
    • Noise: Less than -70 dBu
    • THD: Less than 0.05%
    • Connector Type: DB 25 male

      AES/EBU Outputs
    • Impedance: 110 Ohm transformer balanced
    • Level: 2.5V p-p terminated

      Output (0 dbfs)
    • Noise: Less than -100 dbfs
    • Standard: AES31D-1995
    • THD: Less than 0.001%
    • Type: 3 pin Terminal Block

      Monitor Output
    • Frequency Response: 1.5 dBu from 20Hz to 20kHz
    • Impedance: 60 Ohm balanced
    • Max Output: 23.5 dBu
    • Noise: less than -70 dbfs
    • THD: Less than 0.05%
    • Connector Type: 3 pin Terminal Block
     

MLC8-N - Required Accessories

    California Residents:
    WARNING:
    Cancer and Reproductive Harm - www.P65Warnings.ca.gov