AJA 12G-AM-R-ST 12G-SDI 8-Channel AES Embedder/Disembedder with ST Fiber Rx SFP

12G-AM-R-ST - Overview

• Features:

  • 12G-SDI Input and Output up to 4K/UltraHD
  • 8-channel balanced AES audio Embedder/Disembedder
  • Ships with a ST Fiber single channel SFP Receiver for extending 4K/UltraHD signals over long distances
  • AES audio Disembedding is always functional with four AES outputs
  • AES audio Embedding is user selectable on a channel pair basis, to either pass 12G-SDI input audio or embed input AES audio
  • Selectable AES audio levels
  • Automatically detects and configures the input video standard
  • Small form factor allows for a wide variety of installation locations
  • Supplied XLR breakout cable offers 8-channels In and 8-channels Out over eight XLR connectors
  • USB connectivity via AJA Mini-Config software
  • Dipswitch configuration
  • 5-16 VDC Power
   

• Specifications:

  • Video Formats
  • (4K) 4096x2160p 23.98, 24, 25, 29.97, 30, 50, 59.94, 60
  • (UltraHD) 3840x2160p 23.98, 24, 25, 29.97, 30, 50, 59.94, 60
  • (2K) 2048x1080p 23.98, 24, 25, 29.97, 30,50, 59.94, 60
  • (HD) 1920x1080p 23.98, 24, 25, 29.97, 30, 50, 59.94, 60; 1920x1080i 50, 59.94, 60; 1280x720p 50, 59.94, 60*
  • (SD) 625i 50; 525i 59.94
  • RGB and YCbCr, 4:4:4/4:2:2, 10-bit
  • Note: Raster and frame rate dependent, please see 12G-AM Video Formats in Documents and Manual.
    
    Video Input Digital
  • 1x 12G-SDI BNC, SMPTE 259/292/424/2081/2082
  • Single Link SD/HD/2K/UltraHD/4K
  • Single Link 3G-SDI Level A or B-DL, SMPTE 425
    
    Fiber Input
  • (12G-AM-R, 12G-AM-TR)
  • 1x 12G-SDI Fiber LC connector, SMPTE 297/259/292/424/2081/2082
  • Wavelength: Rx 1260 nm (min), 1620 nm (max)
  • Optical Sensitivity: -10 dBm (min 12 Gbps), -14 dBm (min 3 Gbps)
  • Overload Power: -2 dBm (min)
    
    Fiber Input (12G-AM-R-ST)
  • 1x 12G-SDI Fiber ST connector, SMPTE 297/259/292/424/2081/2082
  • Wavelength: Rx 1260 nm (min), 1620 nm (max)
  • Optical Sensitivity: -10 dBm (min 12 Gbps), -14 dBm (min 3 Gbps)
  • Overload Power: -2 dBm (min)
  • Video Output Digital
  • 1x 12G-SDI BNC, SMPTE 259/292/424/2081/2082
  • Single Link SD/HD/2K/UltraHD/4K
  • Single Link 3G-SDI Level A or B-DL, SMPTE 425
    
    Fiber Output (12G-AM-T, 12G-AM-TR)
  • 1x 12G-SDI Fiber LC connector, SMPTE 297/259/292/424/2081/2082
  • Nominal Wavelength: Tx 1260 nm (min), 1310 nm (typ), 1360 nm (max)
  • Optical Power: -5 dBm (min), 0.5 dBm (max)
  • Extinction Ratio: 5.4 dB (min)
    
    Fiber Output (12G-AM-T-ST)
  • 1x 12G-SDI Fiber ST connector, SMPTE 297/259/292/424/2081/2082
  • Nominal Wavelength: Tx 1260 nm (min), 1310 nm (typ), 1360 nm (max)
  • Optical Power: -5 dBm (min), 2 dBm (max)
  • Extinction Ratio: 3.4 dB (min)
    
    Cable Equalization (Belden 1694A coax)
  • 12 Gbps, 65m
  • 6 Gbps, 125m
  • 3 Gbps, 190m
  • 1.5 Gbps, 200m
  • 270 Mbps, 405m
    
    Video Path Delay
  • Video Out is a delayed, reclocked version of Video In, at same frame rate, etc. Video Out is undefined when no input.
  • Video Latency, time measured between video input and video output connector: 12G/6G/3G level A = 3.2 µsec, 3G level B-DL/HD (1.5 Gb) = 6.3 µsec, SD (270 Mb) = 17.2 µsec
    
    Audio Inputs and Outputs
  • AES PCM audio, 1x 25 pin D female connector on converter, 8-channels in, 8-channels out, selectable in pairs
  • Breakout cable provided with 1x 25 pin D male connector: 4x XLR female input breakout connectors (AES3 110 ohm), 4x XLR male output breakout connectors (AES3 110 ohm), Audio Data Formats, AES3-2003
    
    Embedded Audio
  • SMPTE 272M (SD): 20-bit, 48 kHz synchronous
  • SMPTE 299M (3G/HD): 24-bit, 48 kHz synchronous
  • Incoming embedded audio can be passed, removed, or overridden
  • Up to 16-channels supported
  • Note: 2048x1080p/PsF 29.97 and 30 formats support a maximum of 8-channels embedded audio.
    
    Embed Path Audio Latency
  • (Time measured between audio input and video output connector): 1500 µsec (SRC ON), 400 µsec (SRC OFF)
    
    Disembed Path Audio Latency
  • (Time measured between video input and audio output connector): 210 µsec
    
    User Interface
  • External DIP switch
  • USB port used with Mini-Config software application to configure the device via PC/Mac
    
    General
  • Dimensions (WxDxH): 5.8 x 3.1 x 1" (147.3 x 78.7 x 25.4mm)
  • Weight: 0.6Lbs (0.3kg)
  • Power: +5-16VDC, 10 watts, power supply required, included with purchase
  • Operating Temperature: 0° to 40°C (32° to 104°F)
  • Storage Temperature: -40° to 60°C (-40° to 140°F)
  • Operating Relative Humidity: 10 to 90% non-condensing
  • Operating Altitude: <10,000' (<3,000m)
   

• Warranty:

  • Five year warranty
   

• GTIN:

  0812321032482