Attero Tech UNA6IO 4x2 Ch 2 Gang US Wall Plate 2 Mic/Line In (XLR) - 3.5mm I/O - PoE - AES67 - White & Black Inserts

ITEM #: ATEC-UNA6IO MFG #: UNA6IO

Primary Image

This item is no longer available.
Ask a Markertek Expert if you need assistance finding an appropriate substitute.

(800) 522-2025Email

Items similar to the ATEC-UNA6IO

UNA6IO - Overview

The Attero Tech unA6IO AES67 Audio Interface is a cost effective multi-IO wallbox. The unA6IO features two balanced mic/line XLR inputs, and two balanced outputs on side panel depluggable connectors. Two RCA line level inputs and a 3.5mm TRS line level input complete the available inputs. A 3.5mm TRS line level output is also included. The unA6IO is designed to fit into most dual gang US junction boxes and is PoE enabled, so all connectivity (power, control and audio data) is provided by a single CAT5e/6 cable. The unA6IO’s size and I/O density make it easy to put AES67 connectivity wherever it’s needed - near the audio source or sink - thereby eliminating costly and interference prone analog wiring.

  • Features:

    • 2 Mic/Line balanced analog inputs supporting 0dB, +25dB, and +40dB gain
    • 2 RCA and 1 stereo 3.5mm inputs
    • 1 3.5mm stereo output
    • 2 line level balanced outputs on the side of the unit
    • Input gain, output gain, and +48V phantom power controllable via software over the network
    • Powered by IEEE 802.3af PoE
    • Black and white inserts and Decora plates included
     
  • Specifications:

      Analog Audio Inputs
    • Input Type Two Balanced and RF filtered inputs on XLR (Inputs 1/2)
    • Stereo Unbalanced Inputs on RCA (Inputs 3/4 A)
    • Stereo Unbalanced Inputs on 3.5mm TRS (Inputs 3/4 B)
    • Input Impedance >1.8K Ohms at any gain (Inputs 1/2) >10k Ohms (Inputs 3/4 A & B)
    • Maximum Input Levels
    • +20 dBu, -15 dB Pad Active
      +5 dBu, 0dB Pad Inactive
      -22 dBu, +25 dB Gain
      -38 dBu, +40 dB Gain (Inputs 1/2)
      +12 dBu ( Inputs 3/4 A & B)
    • Phantom Power: +48V DC, software selectable (Inputs 1/2)
    • THD+N: < 0.02% @ 1kHz for all gain settings, input signal 3dB below maximum. (Mic Inputs 1/2) <0.01% (Line Inputs 3/4) (20 -22 kHz Bandwidth)
    • EIN: -115 dB, 20 -22 kHz Bandwidth (Inputs 1/2)
    • Dynamic Range: > 95 dB (20 -22 kHz)
    • Frequency Response
    • 20Hz - 20kHz, +/- 1dB (-18 and - 3 dB gain on Inputs 1/2)
      50Hz - 20kHz +/- 1dB (+25dB and +40dB gain on Inputs 1/2)
      20Hz - 20kHz, +/- 1dB (Inputs 3/4 A & B)

      Analog Audio Output
    • Output Type: Balanced output on side mounted terminal blocks
    • Maximum output level: +20 dBu , with SW volume control
    • THD+N: < 0.05 % (20 -22 kHz)

      AES67 Network
    • Physical Layer: Ethernet
    • Connector (s): RJ-45
    • Cable Quality: CAT-5e or better, UTP
    • Transmission Speed: 100 Mbps
    • Supported Sample Rates: 48kHz
    • Minimum Audio Latency: 1ms
    • AES67 Support: AES67, SAP based stream discovery

      Power Specifications
    • PoE Power: 802.3af Class 0
    • Power Consumption: < 6W Max

      Physical Dimensions
    • Width: 3.54"
    • Height: 4.2"
    • Depth: 2"
    • Weight: 0.6 lbs.

      Regulatory Compliance
    • Certifications FCC CFR 47 Parts 15B Class A, EN55011, ICES-003
    • CE (EN55022 / EN55024), RoHS, REACH

      Environmental Operating Specifications
    • Operating Temperature 0 to 40° C
     
  • Warranty:

    • 5 Year
     

UNA6IO - Required Accessories

    California Residents:
    WARNING:
    Cancer and Reproductive Harm - www.P65Warnings.ca.gov