Attero Tech unDX2IOplus-C 4x2 Ch 2 Gang US Wall Plate 2 Mic/Line In x 2 Out (XLR) - Phoenix I/O - PoE

ITEM #: UNDX2IOPLUS-C MFG #: UNDX2IO+-C

Primary Image
  • Product Image Thumbnail 1 of 2
  • Product Image Thumbnail 2 of 2

This item is no longer available.
Ask a Markertek Expert if you need assistance finding an appropriate substitute.

(800) 522-2025Email

Items similar to the UNDX2IOPLUS-C

UNDX2IO+-C - Overview

The Attero Tech unDX2IO+ Dante™ Audio Interface is a cost effective multi-IO wall box. The unDX2IO+ features two balanced mic/line XLR inputs, two balanced XLR line outputs, and a further two balanced line inputs on de-pluggable connectors on the side of the unit. All inputs and outputs can be used simultaneously and all audio channels are available separately. The unDX2IO+ is designed to fit into all dual gang US junction boxes, mud rings, and old work brackets. The unDX2IO+ is PoE enabled, so all connectivity (power, control, and data) is provided by a single CAT-5/6 cable. The unDX2IO+’s size and I/O density make it easy to put Dante™ connectivity wherever it’s needed.

  • Features:

    • 2 Mic/Line balanced analog inputs supporting 0dB, +15dB, +25dB and +40dB gain
    • 2 separate line level balanced inputs on the side of the unit
    • 2 line level balanced analog outputs
    • Input gain and +48V phantom power controllable via software over the network
    • Powered by IEEE 802.3af PoE
    • Black and white inserts and Decora plates included
     
  • Specifications:

      Audio Inputs
    • Input Type: Balanced and RF filtered 3-pin depluggable
    • Gain: -18dB, -3dB, +25dB, +40dB, software selectable
    • Input Impedance: >1.8K ohms at any gain setting
    • Maximum Input Levels
    • 1 & 2 +20dBu @ 0dB with -15dB Pad
      +5dBu @ 0dB gain,
      -22dBu@ +25dB gain,
      -38dBu @ +40dB gain
    • Maximum Input Levels: 3 & 4 +4dBu Mode - +20dBu, -10dBV Mode - +12dBu
    • Phantom Power: +48V, software selectable

      Audio Outputs
    • Output Type: Balanced line level with automatic muting on loss of Dante signal
    • Output Gain 0dB
    • Maximum output level: +20dBu

      Audio Performance
    • EIN -115bBu (+40dB gain)
    • Output Noise: <-85dBu @ 0dB gain
    • System THD: <0.05% at any gain, input signal 3dB below maximum

      Dante Network
    • Physical Level: Standard Ethernet
    • Connector: Single RJ-45
    • Cable Quality: CAT-5e or better
    • Transmission Speed: 100 Mbps
    • Supported Sample Rates 44.1kHz - 48kHz
    • Minimum Dante Network Latency 1ms

      Power Requirements
    • PoE: 802.3af PoE PD compliant
    • Power Consumption: < 5W Max
    • Cable Quality: CAT-5e or better

      Physical Dimensions
    • Width: 3.54"
    • Height: 4.2"
    • Depth: 2"
    • Weight: 0.6 lbs.

      Product Compliance
    • FCC CFR 47 Parts 15B Class A, EN55011, ICES-003, CE (EN55022 / EN55024), RoHS, REACH
     
  • Warranty:

    • 5 Year
     

UNDX2IO+-C - Required Accessories

    California Residents:
    WARNING:
    Cancer and Reproductive Harm - www.P65Warnings.ca.gov