Rane Terminal 1010x Multiprocessor (1U) 10-In x 10-Out- 6 RAD+ Ports and Dante Expansion Slot

TERMINAL1010 - Overview

• Features:

  • Native Analog 10-in/10-out
  • 6 RAD+ Ports support RADs and DRs - adds 12-in/12-out, for a total 22-in/22-out
  • Optional DANTE™ card adds 32-in/32-out on the network
  • Expansion Port for future hardware releases
  • Online Wizard for quick-start using Halogen software
  • Enhanced front panel control and monitoring
   

• Specifications:

  • Analog I/O
  • Type: 10 in x 10 out
  • ADC: High definition audio 24-bit, 48kHz, DR 116dB A-weighted
  • DAC: High definition audio 24-bit, 48kHz, DR 116dB A-weighted
    
    Inputs
  • Frequency Response: 20Hz-20kHz, ±0.1dB
  • Input Connections: (5) Euroblock connectors, 6 pins each, 3.81mm pitch, green. Ships with strain relief plugs.
    
    Condenser Mic Mode
  • Type: Active balanced, microphone input mode with 48V phantom power
  • Phantom Power: +48V
  • Maximum Input: 1Vrms
  • Input Impedance: 2.5kΩ Each leg
    
    Dynamic Mic Mode
  • Type: Active balanced, microphone input mode without phantom power
  • Maximum Input: 250mVrms
  • Input Impedance: 2.5kΩ Each leg
    
    Line Mode
  • Type: Active balanced, line-level
  • Maximum Input: 8Vrms
  • Input Impedance: 5kΩ Each leg
    
    Line+Mode
  • Type: Active, left [+] & right [-] signals summed to mono
  • Maximum Input: 8Vrms
  • Input Impedance: 5kO Each leg
    
    Outputs
  • Connections: (5) Euroblock connectors, 6 pins each, 3.81mm pitch, orange. Ships with strain relief plugs.
  • Type: Active balanced, line output mode with active output transient muting
  • Maximum Output: 8Vrms
  • Impedance: 300O Each leg
  • Frequency Response: 20Hz-20kHz, ±0.1dB
    
    DSP
  • Processing Power: >10,000 MIPS
  • Word Length: 32-/64-bit Floating Point
  • Delay Memory: Min. 160sec total
    
    Computer Interface
  • Type: Ethernet 1000 base-T - Zeroconf service discovery protocol for easy setup
  • Connection: RJ-45 - Shielded Cat 5e cable or better
  • Length: 300ft./100m - Standard Ethernet cable length limit
    
    RAD+Ports
  • Connections: (6) RJ-45 - Shielded Cat 5e cable or better
  • Audio Channels: 2 in, 2 out - Each port, control channel 24-bit, 48kHz
  • Voltage: 27 VDC Each port
  • Power: 12W (peak)/6W (average) - Each port
  • Length: DR devices: 984ft./300m - RAD devices: 325ft./100m
    
    Universal Logic I/O
  • Connections: (1) mini-Euroblock connector, 6 pins, 3.81mm pitch, black
    
    Logic
  • Logic In:
    Internal Pull-Up: 5mA - Protected to +24V, reverse-polarity-protected
    Vin High: > 2.2V - Normal state
    Vin Low: < 1.0V
  • Logic Out:
    Open Collector Output: Source 5mA, Sink 200mA - Protected to +24V, reverse-polarity-protected
    Vout High: > 2.2V
    Vout Low: < 0.2V
    
    Ratiometric Input
  • Input: 0-5V
  • V+: 40mA
  • Resolution: 8-bit at 2kHz sample rate
    
    Expansion Port
  • Types:
    Rane Expansion Bus: 512 x 512, 48kHz digital audio plus control. Up to 32 Halogen Expansion Devices
    Dante card (optional): 32 x 32 with sample-rate conversion, allowing 96kHz sample rate Dante flows
  • Connection: RJ-45 - Shielded Cat 5e cable or better
  • Maximum Length: 300ft./100m
    
    Power
  • Connection: IEC
  • Voltage: 90-260VAC, 50/60Hz
  • Consumption: 70W
  • Output: 28V
    
    Unit
  • Wiring: Class 2 - Rear-panel terminals
  • Operating Temperature: 32 to 104°F (0 to 40°C)
  • Fan: 10CFM, low noise (<20dBa), long life (60k hours at 45°C)
  • Dimensions (WxDxH): 19 x 8.25 x 1.73" (48.3cm x 20.9cm x 4.4cm)
  • Weight: 7.0Lbs (3.2kg)
   

• Item Includes:

  • 1x Terminal 1010x
  • 5x 6-pin 3.8 mm Euroblock input (green, for audio inputs)
  • 5x 6-pin 3.8 mm Euroblock outputs (orange, for zone outputs)
  • 1x 6-pin 3.8 mm Euroblock input (black, for logic input)
  • 1x IEC Power Cable
  • 1x Quickstart Guide
  • 1x Safety & Warranty Manual
   

• GTIN:

  0694318023594