Focusrite AMS-RED-8-PRE 64x64 DANTE Audio Interface for ProTools HD and Thunderbolt

ITEM #: FCSR-AMS-RED8PRE MFG #: AMS-RED-8-PRE

Primary Image

This item is no longer available.
Ask a Markertek Expert if you need assistance finding an appropriate substitute.

(800) 522-2025Email

Items similar to the FCSR-AMS-RED8PRE

AMS-RED-8-PRE - Overview

Focusrite AMS-RED-8-PRE Red 8Pre features both Thunderbolt 2 connectivity and dual mini-DigiLink ports allowing you the best of both Core Audio and Pro Tools / HD workflows. Take Red 8Pre on the road for location recording over Thunderbolt then connect the same interface to Pro Tools/HDX or Pro Tools/HD Native back at the studio for mixdown. Switch easily between Pro Tools / HD and any Thunderbolt-connected DAW with Host Mode. The combination of low-latency conversion and driver technology allows real-time foldback mixes to be created in the DAW while you continue to use your native plug-ins. Unlike many interfaces, both mini-DigiLink and Thunderbolt 2 connectivity comes as standard, so there's no need to buy an additional option card.

Eight Red Evolution Mic Pres
Focusrite's Red Evolution mic pres draw on many decades of design prowess as well as many of the elements behind the incredibly popular RedNet mic pre used in many studios, broadcast facilities and live performances around the world. The digitally-controlled mic pres deliver a clear and honest sound with very low noise and plenty of gain available for the most-quiet of sources. They can be controlled from the front panel or remotely over Thunderbolt using Focusrite Control. Additionally the mic pre settings can be saved and recalled allowing you to quickly re-setup for your next session. They also include our unique 'Air' effect, recreating the sound of the transformer-based mic preamps in the ISA and original Red ranges. When 'Air' is enabled, the microphone impedance is lowered and the sound is given a subtle mid-high boost - all in the analogue domain.

Parallel Path Conversion
Focusrite has been designing digital converters for over 20 years. From the original Blue 245 and 260 mastering-grade A-D and D-A, through the Liquid Channel and more recently RedNet, digital conversion is a key part of our design heritage and philosophy. Every converter we design starts with the same objectives: low latency, high dynamic range and a flat, wide frequency response. Red 8Pre's conversion achieves just that, lightning fast performance, a dynamic range of 118dB A-D and 121dB D-A and a flat response to 35kHz. By using "parallel path summing" we have achieved even greater noise-performance than ever.

Room For Expansion
While Red 8Pre has enough I/O for many scenarios, sometimes more is needed. That's why Red 8Pre includes two ADAT ports, for up to 16 additional inputs and outputs. Simply connect any ADAT equipment, such as the Focusrite Octopre, using light pipes. However in today's modern studio, audio networking is taking over. Focusrite's RedNet range is the world's most popular modular audio-over-IP platform. We've brought some of that technology to Red 8Pre, allowing up to 32 channels of Dante inputs and outputs to be connected. Simply plug in an Ethernet cable and add additional mic pres or line I/O with ease. Alternatively arrive at the studio or venue and simply connect one Ethernet cable to Red 8Pre to gain access to the whole network. The possibilities are huge.

Included Software
Red 8Pre includes the new Focusrite Control software, providing a straightforward and intuitive way to set up mixes and monitoring - and more! Control the mic pres - recall settings, assign stereo pairs, adjust gain and enable features such as highpass filtering and phantom power. Switch quickly between Pro Tools / HD and a Thunderbolt-connected DAW with the Host Mode setting. In addition, Red 8Pre is packaged with Softube's Time and Tone Bundle - a unique plug-in pack including four of Softube's professional quality plug-ins: Drawmer S73 Intelligent Master Processor, TSAR-1R Reverb, Tube Delay and Saturation Knob. Also in the box is the Focusrite Red Plug-in Suite, which accurately models Focusrite's classic Red range 2 and 3 equaliser and compressor hardware.

  • Specifications:

    • Microphone Inputs
    • Gain Range: 0-8dB to 63dB in 1dB steps
    • Type: Electronically Balanced, Zin = 6.2kΩ
    • Max. Input Level: +19dBu ±0.5, min gain
    • Min. Input Level: -44dBu ±0.5
    • Frequency Response: 20Hz - 35kHz ±0.2dB, min gain
    • THD + N: -101dB (0.0009%) @ -1dBFS (@ 11dB Gain)
    • EIN: -129dBu 'A'-Weighted (typical)
    • Signal-To-Noise Ratio: 119dB 'A'-Weighted (typical), min gain
    • Common-Mode Rejection Ratio: 50/60Hz CMRR: -70dB
    • Phantom Power: +48V, independently switchable per channel.
    • HPF: High-Pass Filter (HPF): -3dB @ 80 ± 3Hz, 12dB/Octave, independently switchable per channel
    • Air Mode: 2dB boost at 10kHz and -2dB at 20Hz (ref 1kHz). Input impedance drop to 2.2kΩ

      Line Inputs
    • Type: Electronically Balanced, Zin = 10kΩ
    • Max. Input Level: +27dBu ±0.5, min gain
    • Min. Input Level: -36dBu ±0.5
    • Frequency Response: 20Hz - 35kHz ±0.2dB, min gain
    • THD + N: -101dB (0.0009%) @ -1dBFS (@ 11dB Gain)
    • Signal-To-Noise Ratio: 119dB 'A'-Weighted (typical), min gain
    • Common-Mode Rejection Ratio: 50/60Hz CMRR: -70dB
    • HPF: High-Pass Filter (HPF): -3dB @ 80 ± 3Hz, 12dB/Octave, independently switchable per channel
    • Air Mode: 2dB boost at 10kHz and -2dB at 20Hz (ref 1kHz)

      Line Outputs 3-18
    • 0 DBFS Reference Levels: +18dBu ±0.5
    • Frequency Response: 20Hz - 35kHz ±0.2dB
    • THD + N: <-102dB (0.0008%) unweighted, 20Hz - 20kHz; -1dBFS input
    • Dynamic Range: 121dB 'A'-weighted (typical), 20Hz - 20kHz
    • Output Impedance: Nominal output impedance = 136Ω balanced (68Ω each phase)

      Monitor Outputs
    • Frequency Response: 20Hz - 35kHz ±0.2dB
    • Dynamic Range: +120dB (A-Weighted)
    • Maximum Output Level (0 DBFS): +18dBu ±0.5
    • THD+N: <-78dB (0.0012%) unweighted, 20Hz - 20kHz; -1dBFS input
    • Stereo Level Balance: ±0.02dB @ 997Hz
    • Output Impedance: Nominal output impedance = 136Ω balanced (68Ω each phase)

      Dimensions
    • Dimensions Height: 44mm/ 1.73"
    • Dimensions Width: 483mm/ 19.02"
    • Dimensions Depth (Chassis Only): 340mm/ 13.39"

      General
    • Channel Count: Up to 64 x 64
    • Computer: Apple Mac with at least one Thunderbolt or Thunderbolt 2 port (2m Thunderbolt cable included)
    • Other: Internet connection for downloading and installing software and driver
    • Weight: 5.14kg
    • Power PSU: 1 x Internal, 100-240V, 50/60Hz, consumption 65W
    • Instrument Inputs Channel Count: 2 Channels In
    • Instrument Inputs Instrument Inputs: 2 x 1/4" TS stereo jack
    • Monitor Outputs Channel Count: 2 Out
    • Monitor Outputs: 2 x 1/4" TRS stereo jack
     

AMS-RED-8-PRE - Required Accessories

    California Residents:
    WARNING:
    Cancer and Reproductive Harm - www.P65Warnings.ca.gov