Attero Tech UNDX4I Dual Gang 4 XLR Mic/Line In Dante Wall Plate - White

ITEM #: ATEC-UNDX4I-WE MFG #: 900-00185-W-C

Primary Image
  • Product Image Thumbnail 1 of 2
  • Product Image Thumbnail 2 of 2

This item is no longer available.
Ask a Markertek Expert if you need assistance finding an appropriate substitute.

(800) 522-2025Email

Items similar to the ATEC-UNDX4I-WE

900-00185-W-C - Overview

The unDX4I Dante Audio Interface is a cost effective multi O wall box. The unDX4I features four balanced mic/line XLR inputs and two balanced line outputs on a Phoenix connector. All inputs and outputs can be used simultaneously and all audio channels are available separately. The unDX4I is designed to fit into most dual gang US junction boxes and is PoE enabled, so all connectivity (power and data) is provided by a single CAT 5 cable. The unDX4I’s size and IO density make it easy to put Dante connectivity wherever it’s needed near the audio source or sink thereby eliminating costly and interference prone analog wiring.

  • Features:

    • 4 balanced XLR mic/line inputs
    • 2 balanced line outputs on Pheonix depluggable connectors
    • 802.3af compliant PoE powered to work with any compliant PoE network switch
    • Three input gains accommodate common line levels, phantom power and dynamic mics. Input gains are adjustable via software on a per input basis
    • +48V Phantom power per channel powers virtually all types of phantom powered microphones typically used in installed AV systems
    • ID LED allows easy identification of which unDX4I Attero Tech’s Unify software is communicating with
    • The balanced line outputs can be wired to any passive XLR plate such that 4 XLR inputs and 2 XLR
     
  • Specifications:

    • Mic/Line Input Type: Balanced and RF filtered 3 pin depluggable
    • Phantom Power: +48V, software selectable
    • Mic/Line Gain: 18dB, 3dB, +25dB, +40dB, software selectable
    • Input Impedance: >1.8K ohms at any gain setting
    • Equivalent Input Noise: 115dBu (+40dB gain)
    • Maximum Input Levels: +20dBu @ 18dB gain, +6dBu @ 3dB gain, 23dBu @ +25dB gain, 38dBu @ +40dB gain
    • Output Type: Balanced line level with automatic muting on loss of Dante signal
    • Output Gain: 0dB to 60dB, in 1dB increments software adjustable
    • Output Noise: <80dBu @ 0dB gain
    • Maximum Output Level: +20dBu
    • System THD: <.02% at any gain, input signal 3dB below maximum
    • PoE Class: Class 0 802.3af PoE PD compliant
    • Certifications: FCC Part 15 Class A, CE (EN 55022 Class A)
    • Dimensions: 3.60" W x 2.75" H x 1.88" D
    • Operating Temperature: 0 °C 40°C
     

900-00185-W-C - Required Accessories

    California Residents:
    WARNING:
    Cancer and Reproductive Harm - www.P65Warnings.ca.gov